cjdelisle/cjdns

cjdns

Русская версия Hrvatski Svenska Ελληνικά Deutsch 繁體中文 简体中文 Español Français Português brasileiro

Networking Reinvented

Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Testimonials

23:26 <@jercos> well, cjdns is now officially more reliable than the open
                internet for getting to my cheaper VPSes :|

12:52 < mariner> so i don't know if it's been done before, and i assume it's
                 obvious, but I think it's neat. Currently on hype from an
                 airplane

00:36 < tester> man sites take so long to load on i2p
00:36 < tester> i value speed over anonymity any day

<DuoNoxSol> it's notably more reliable than the normal internet

09:46 < Kubuxu> I so love cjdns code base

<whyrusleeping> my internet is way better now.
<whyrusleeping> thanks
<whyrusleeping> i'm really upset and sad that its better
<whyrusleeping> but also quite happy

21:01 <@grewalsat> this is amazing. with my workpalce speedtest.net results I get around 6+mb speed, and with my cjdns-gate as vpn network I'm getting like 11-15mb download speed in speedtest.net
21:01 <@grewalsat> :P
21:01 <@grewalsat> plus, access anything! :D

<davidar> Yeah, I have to admit I sort of avoided hypeirc because of stuff like that

Community

• irc://irc.efnet.org/#cjdns

Documentation

• Project Goals
• Cjdns Whitepaper

Advanced configuration:

• Setup a cjdns NAT gateway for your LAN

Thank you for your time and interest,

The cjdns developers.

How to install cjdns

These instructions are for Linux distributions and macOS. They should be informative enough for use on other distributions - just don't expect them to work verbatim. If you want to know what operating system's base is go here.

Option 1: Using cjdns.sh

If you're on Linux with an amd64 processor (if you don't know your processor, it's amd64), you can install cjdns pre-built binaries using cjdns.sh. See: https://github.com/cjdelisle/cjdns.sh for more information.

Option 2: Build from source

In order to compile cjdns, you must have:

• Rust
• NodeJS (used for building the C code)
• GCC or Clang C compiler
• Make (used for compiling one of the Rust dependencies)
• Git (to checkout this repository)

0. Install dependencies

Debian-based distro:

sudo apt-get install nodejs git build-essential
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

Redhat-based distro:

sudo dnf install nodejs git
sudo dnf install @development-tools
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

MacOS:

Check that you have clang activated:

xcode-select --install

Install with Homebrew:

brew install node git make
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

1. Retrieve cjdns from GitHub

Clone the repository from GitHub and change to the source directory:

git clone https://github.com/cjdelisle/cjdns.git cjdns
cd cjdns

2. Build

./do

Look for Build completed successfully, type ./cjdroute to begin setup., then proceed below:

Setup

Run cjdroute without options for HELP:

./cjdroute

0. Make sure you've got the stuff.

If you're on macOS, skip this step.

LANG=C cat /dev/net/tun

If it says: cat: /dev/net/tun: File descriptor in bad state Good!

If it says: cat: /dev/net/tun: No such file or directory, create it using:

sudo mkdir -p /dev/net &&
sudo mknod /dev/net/tun c 10 200 &&
sudo chmod 0666 /dev/net/tun

Then cat /dev/net/tun again.

If it says: cat: /dev/net/tun: Permission denied You're probably using a VPS based on the OpenVZ virtualization platform. Ask your provider to enable the TUN/TAP device - this is standard protocol so they should know exactly what you need.

1. Generate a new configuration file

./cjdroute --genconf | sudo tee -a /etc/cjdroute.conf

Protect your conf file!

A lost conf file means you lost your password and connections and anyone who connected to you will no longer be able to connect. A compromised conf file means that other people can impersonate you on the network.

2. Secure your system - check for listening services

Once your node is running, you're now a newly minted IPv6 host. Your operating system may automatically reconfigure network services to use this new address. If this is not what you intend, you should check to see that you are not offering more services than you intended to. ;)

See doc/network-services.md for instructions.

3. Start it up!

sudo ./cjdroute < /etc/cjdroute.conf

If you want to have your logs written to a file:

sudo ./cjdroute < /etc/cjdroute.conf > cjdroute.log

To stop cjdns:

sudo killall cjdroute

If you are having problems use killall cjdroute to return to sanity. Use pgrep cjdroute or top to see if it running.

NOTE!

This starts cjdns as the root user so it can configure your system without concern for permissions. To start cjdns as a non-root user, see doc/non-root-user.md.

Custom peering

By default, cjdns will reach out to a DNS seeder to find peers and will automatically connect to them. This of course exposes the fact that you're running cjdns to the operators of these nodes.

If you're planning on running a "clandestine" cjdns node, find the dnsSeeds section of the configuration and comment it out. Then take the peering credentials of a node you would like to connect to and add them to the UDPInterface / connectTo section of the cjdroute.conf.

See doc/peering.md

Admin interface

When cjdroute is up and running, the admin interface will be available at udp://localhost:11234 (this can be changed in the cjdroute.conf configuration file). See doc/admin-api.md for more information about the admin interface. There are several tools in contrib/ that can interact with it.

You can access the admin API with:

• ./cjdnstool
• The Python library; see here.
• The Perl library, maintained by Mikey; see here.

Reporting issues

1. Don't report in this repo, please instead report it at https://github.com/hyperboria/bugs/issues
2. Get on IRC and talk to somebody
3. What will happen is either

• Someone feels like fixing it
• You feel like fixing it
• Nobody cares about it and it will be forgotten for a while and maybe someone will hit it later and fix it or else it will get wiped away in a refactoring
• Nobody can fix it at the moment but it is considered worth remembering because it has great significance to the way the code is developed, in this case it needs to be explained in technical terms by someone with strong familiarity with the code. They will make a pull request to the docs/bugs directory.

Security

Security issues should be reported on IRC the same as other bugs. We don't have a closed group of people with special knowledge so that means the default security reporting method is full disclosure.

See: security_specification.md to see if a possible security issue is really a security issue.