rust-lang/rustfmt is tracked by TopGit as a developer tool, with 7.0k stars on GitHub, written primarily in Rust. Format Rust code
Snapshot summary built from the project's own GitHub metadata — there's no written TopGit review yet. The page will update automatically when a full review is published.
WHY NO REVIEW YET
TopGit writes full reviews for the most-starred, most-requested repositories. This page is a snapshot until then — see the READ ME tab for the original README in full.
A tool for formatting Rust code according to style guidelines.
If you'd like to help out (and you should, it's a fun project!), see
Contributing.md and our Code of
Conduct.
You can use rustfmt in Travis CI builds. We provide a minimal Travis CI
configuration (see here).
Quick start
You can run rustfmt with Rust 1.24 and above.
On the Stable toolchain
To install:
rustup component add rustfmt
To run on a cargo project in the current working directory:
cargo fmt
On the Nightly toolchain
For the latest and greatest rustfmt, nightly is required.
To install:
rustup component add rustfmt --toolchain nightly
To run on a cargo project in the current working directory:
cargo +nightly fmt
Limitations
Rustfmt tries to work on as much Rust code as possible. Sometimes, the code
doesn't even need to compile! In general, we are looking to limit areas of
instability; in particular, post-1.0, the formatting of most code should not
change as Rustfmt improves. However, there are some things that Rustfmt can't
do or can't do well (and thus where formatting might change significantly,
even post-1.0). We would like to reduce the list of limitations over time.
The following list enumerates areas where Rustfmt does not work or where the
stability guarantees do not apply (we don't make a distinction between the two
because in the future Rustfmt might work on code where it currently does not):
a program where any part of the program does not parse (parsing is an early
stage of compilation and in Rust includes macro expansion).
Macro declarations and uses (current status: some macro declarations and uses
are formatted).
Comments, including any AST node with a comment 'inside' (Rustfmt does not
currently attempt to format comments, it does format code with comments inside, but that formatting may change in the future).
Rust code in code blocks in comments.
Any fragment of a program (i.e., stability guarantees only apply to whole
programs, even where fragments of a program can be formatted today).
Code containing non-ascii unicode characters (we believe Rustfmt mostly works
here, but do not have the test coverage or experience to be 100% sure).
Bugs in Rustfmt (like any software, Rustfmt has bugs, we do not consider bug
fixes to break our stability guarantees).
Running
You can run Rustfmt by just typing rustfmt filename if you used cargo install. This runs rustfmt on the given file, if the file includes out of line
modules, then we reformat those too. So to run on a whole module or crate, you
just need to run on the root file (usually mod.rs or lib.rs). Rustfmt can also
read data from stdin. Alternatively, you can use cargo fmt to format all
binary and library targets of your crate.
You can run rustfmt --help for information about available arguments.
The easiest way to run rustfmt against a project is with cargo fmt. cargo fmt works on both
single-crate projects and cargo workspaces.
Please see cargo fmt --help for usage information.
You can specify the path to your own rustfmt binary for cargo to use by setting theRUSTFMT
environment variable. This was added in v1.4.22, so you must have this version or newer to leverage this feature (cargo fmt --version)
rustfmt supports args-files, using @:
$ printf -- "--check\npath/to/file.rs\n" > args_file
$ rustfmt @args_file
# the above is equivalent to
$ rustfmt --check path/to/file.rs
Running rustfmt directly
To format individual files or arbitrary codes from stdin, the rustfmt binary should be used. Some
examples follow:
rustfmt lib.rs main.rs will format "lib.rs" and "main.rs" in place
rustfmt will read a code from stdin and write formatting to stdout
For more information, including arguments and emit options, see rustfmt --help.
Verifying code is formatted
When running with --check, Rustfmt will exit with 0 if Rustfmt would not
make any formatting changes to the input, and 1 if Rustfmt would make changes.
In other modes, Rustfmt will exit with 1 if there was some error during
formatting (for example a parsing or internal error) and 0 if formatting
completed without error (whether or not changes were made).
Running Rustfmt from your editor
Vim
Emacs
Sublime Text 3
Atom
Visual Studio Code
IntelliJ or CLion
Checking style on a CI server
To keep your code base consistently formatted, it can be helpful to fail the CI build
when a pull request contains unformatted code. Using --check instructs
rustfmt to exit with an error code if the input is not formatted correctly.
It will also print any found differences. (Older versions of Rustfmt don't
support --check, use --write-mode diff).
A minimal Travis setup could look like this (requires Rust 1.31.0 or greater):
To run rustfmt after this, use cargo run --locked --bin rustfmt -- filename. See the
notes above on running rustfmt.
Configuring Rustfmt
Rustfmt is designed to be very configurable. You can create a TOML file called
rustfmt.toml or .rustfmt.toml, place it in the project or any other parent
directory and it will apply the options in that file. See rustfmt --help=config for the options which are available, or if you prefer to see
visual style previews, GitHub page.
By default, Rustfmt uses a style which conforms to the Rust style guide that has been formalized through the style RFC
process.
Configuration options are either stable or unstable. Stable options can always
be used, while unstable ones are only available on a nightly toolchain, and opt-in.
See GitHub page for details.
Rust's Editions
The edition option determines the Rust language edition used for parsing the code. This is important for syntax compatibility but does not directly control formatting behavior (see Style Editions).
When running cargo fmt, the edition is automatically read from the Cargo.toml file. However, when running rustfmt directly, the edition defaults to 2015. For consistent parsing between rustfmt and cargo fmt, you should configure the edition in your rustfmt.toml file:
edition = "2018"
Style Editions
This option is inferred from the edition if not specified.
See Rust Style Editions for details on formatting differences between style editions.
rustfmt has a default style edition of 2015 while cargo fmt infers the style edition from the edition set in Cargo.toml. This can lead to inconsistencies between rustfmt and cargo fmt if the style edition is not explicitly configured.
To ensure consistent formatting, it is recommended to specify the style_edition in a rustfmt.toml configuration file. For example:
style_edition = "2024"
Tips
To ensure consistent parsing between cargo fmt and rustfmt, you should configure the edition in your rustfmt.toml file.
To ensure consistent formatting between cargo fmt and rustfmt, you should configure the style_edition in your rustfmt.toml file.
For things you do not want rustfmt to mangle, use #[rustfmt::skip]
To prevent rustfmt from formatting a macro or an attribute,
use #[rustfmt::skip::macros(target_macro_name)] or
#[rustfmt::skip::attributes(target_attribute_name)]
Example:
#![rustfmt::skip::attributes(custom_attribute)]
#[custom_attribute(formatting , here , should , be , Skipped)]
#[rustfmt::skip::macros(html)]
fn main() {
let macro_result1 = html! { <div>
Hello</div>
}.to_string();
When you run rustfmt, place a file named rustfmt.toml or .rustfmt.toml in
target file directory or its parents to override the default settings of
rustfmt. You can generate a file containing the default configuration with
rustfmt --print-config default rustfmt.toml and customize as needed.
After successful compilation, a rustfmt executable can be found in the
target directory.
If you're having issues compiling Rustfmt (or compile errors when trying to
install), make sure you have the most recent version of Rust installed.
You can change the way rustfmt emits the changes with the --emit flag:
Example:
cargo fmt -- --emit files
Options:
Flag
Description
Nightly Only
files
overwrites output to files
No
stdout
writes output to stdout
No
coverage
displays how much of the input file was processed
Yes
checkstyle
emits in a checkstyle format
Yes
json
emits diffs in a json format
Yes
License
Rustfmt is distributed under the terms of both the MIT license and the
Apache License (Version 2.0).
The most recent commit recorded on rust-lang/rustfmt was 1 day ago, based on the GitHub push timestamp. The repository has 1.1k forks — one of the better signals of community interest.
How many stars does rust-lang/rustfmt have?
rust-lang/rustfmt has 7.0k GitHub stars — refresh the page for the live number, or check github.com/rust-lang/rustfmt. TopGit mirrors GitHub's count but does not claim minute-by-minute accuracy.
What else is in the Developer Tools space?
rust-lang/rustfmt is tracked by TopGit under the Developer Tools category, alongside 4 GitHub-tagged topics. Trending and Topics pages list peer repositories of comparable stars and language.
What language is rust-lang/rustfmt written in?
rust-lang/rustfmt is written primarily in Rust. GitHub's language field is based on the largest share of bytes in the default branch.
What topics is rust-lang/rustfmt associated with?
GitHub's repository topics for rust-lang/rustfmt: "codeformatter", "formatter", "rust", "rustfmt". TopGit's editorial category is Developer Tools.
Where do I read more about rust-lang/rustfmt?
This TopGit page is a snapshot — the READ ME tab shows the project's own README content (links stripped, images preserved). The GitHub repository at github.com/rust-lang/rustfmt is the definitive source.
Why is rust-lang/rustfmt categorized under Developer Tools?
TopGit places rust-lang/rustfmt in the Developer Tools category based on its GitHub topics and description (tagged: "codeformatter", "formatter", "rust"). Categories are assigned from real repository metadata, not editorial guesswork.
Read full README in the tab above.
Want a second opinion on rustfmt?
Ask an AI that can read this page — one click and you get its take on rustfmt.