Điểm qua albfan/miraclecast: 4.4k sao trên GitHub, viết chủ yếu bằng C. Connect external monitors to your system via Wifi-Display specification also known as Miracast
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
The MiracleCast project provides software to connect external monitors to your system via Wi-Fi. It is compatible to the Wifi-Display specification also known as Miracast. MiracleCast implements the Display-Source as well as Display-Sink side.
The Display-Source side allows you to connect external displays to your system and stream local content to the device. A lot of effort is put into making this as easy as connecting external displays via HDMI. Note: This is not implemented yet. Please see #4.
On the other hand, the Display-Sink side allows you to create wifi-capable external displays yourself. You can use it on your embedded devices or even on full desktops to allow other systems to use your device as external display.
Requirements
The MiracleCast projects requires the following software to be installed:
systemd: A system management daemon. It is used for device-management (udev), dbus management (sd-bus) and service management.
Systemd >= 221 will work out of the box. For earlier versions systemd must be compiled with --enable-kdbus, even though kdbus isn't used, but only the independent, experimental sd-libraries.
required: >=systemd-213
glib: A utility library. Used by the current DHCP implementation. Will be removed once sd-dns gains DHCP-server capabilities.
required: ~=glib2-2.38 (might work with older releases, untested..)
gstreamer: MiracleCast rely on gstreamer to show cast its output. You can test if all needed is installed launching res/test-viewer.sh
wpa_supplicant: MiracleCast spawns wpa_supplicant with a custom config.
P2P Wi-Fi device Although widespread these days, there are some devices not compatible with Wi-Fi Direct (prior know as Wi-Fi P2P). Test yours with res/test-hardware-capabilities.sh
check: Test-suite for C programs. Used for optional tests of the MiracleCast code base.
optional: ~=check-0.9.11 (might work with older releases, untested..)
copy the dbus policy res/org.freedesktop.miracle.conf to /etc/dbus-1/system.d/
Build and install
To compile MiracleCast, you can choose from:
autotools
cmake
meson
See more info on wiki Building
Automatic interface selection with udev
If you want to select the interface to start miraclecast with, add a udev rule with the script res/write-udev-rule.sh and configure miraclecast with
$ ../configure --enable-rely-udev
You can also choose the interface with --interface option for miracle-wifid.
Linux Flavours and general compilation instructions
Ubuntu
Check your systemd version with:
$ systemctl --version
If you are on 221 or above your systemd has kdbus enabled.
If you are below 221, an alternative repo was created to install systemd with dbus
launch sink control (your network card will be detected. here 3)
$ sudo miracle-sinkctl
[ADD] Link: 3
run WiFi Display on link:
> run 3
Pair your machine with other miracast device (mirroring)
See your screen device on this machine
Steps to use it as peer
Repeat steps 1 and 2 from "use as sink"
launch wifi control
$ sudo miracle-wifictl
Enable visibility for other devices
Locate them using scanning
> p2p-scan
Apart from list, or show info with peer <mac> there's nothing useful here by now. For a Q&D see Using as peer
UIBC
The User Input Back Channel (UIBC) is an optional WFD feature that when implemented facilitates communication of user inputs to a User Interface, present at the WFD Sink, to the WFD Source.
To use it just add --uibc on miracle-sinkctl startup. Single mouse events and key events are implemented.
Autocompletion
Source res/miraclecast-completion for autocompletion
License
This software is licensed under the terms of the GNU-LGPL license. Please see ./COPYING for further information.
Credits
This software is originally maintained by: David Herrmann [email protected]
albfan/miraclecast có 4.4k sao GitHub — tải lại trang để xem số mới nhất, hoặc xem trực tiếp github.com/albfan/miraclecast. TopGit phản chiếu số sao của GitHub nhưng không cam kết đến từng phút.
albfan/miraclecast có phải mã nguồn mở không?
TopGit chưa ghi nhận license cho albfan/miraclecast. Phần lớn repo public trên GitHub là mã nguồn mở, nhưng điều khoản khác nhau từng repo — mở file LICENSE để xác nhận.
albfan/miraclecast còn đang phát triển không?
Commit gần nhất trên albfan/miraclecast là 8 tháng trước (theo timestamp GitHub). Repo có 433 fork — một chỉ báo về mức độ quan tâm của cộng đồng.
albfan/miraclecast là gì?
albfan/miraclecast (albfan/miraclecast) là dự án C trên GitHub. Theo mô tả gốc: Connect external monitors to your system via Wifi-Display specification also known as Miracast
albfan/miraclecast viết bằng ngôn ngữ gì?
albfan/miraclecast chủ yếu viết bằng C. Trường "language" của GitHub dựa trên phần lớn byte ở nhánh mặc định.
Đọc thêm về albfan/miraclecast ở đâu?
Trang TopGit này là một snapshot — tab "Readme" hiển thị nguyên văn README của repo (đã bỏ link, giữ ảnh). Repo GitHub ở github.com/albfan/miraclecast là nguồn chính thức.
Đọc đầy đủ README ở tab phía trên.
miraclecast có đáng để bạn bỏ thời gian?
ChatGPT, Claude và Perplexity đều đọc được trang này. Hỏi thử xem họ nghĩ gì về miraclecast.