Điểm qua ceph/s3-tests: 373 sao trên GitHub, viết chủ yếu bằng Python. Compatibility tests for S3 clones
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
These tests have moved into the https://github.com/ceph/ceph repository and will no longer be maintained here.
========================
S3 compatibility tests
This is a set of unofficial Amazon AWS S3 compatibility
tests, that can be useful to people implementing software
that exposes an S3-like API. The tests use the Boto2 and Boto3 libraries.
The tests use the Tox tool. To get started, ensure you have the tox
software installed; e.g. on Debian/Ubuntu::
sudo apt-get install tox
You will need to create a configuration file with the location of the
service and two different credentials. A sample configuration file named
s3tests.conf.SAMPLE has been provided in this repo. This file can be
used to run the s3 tests on a Ceph cluster started with vstart.
Once you have that file copied and edited, you can run the tests with::
Some tests have attributes set based on their current reliability and
things like AWS not enforcing their spec stricly. You can filter tests
based on their attributes::
S3TEST_CONF=aws.conf tox -- -m 'not fails_on_aws'
Most of the tests have both Boto3 and Boto2 versions. Tests written in
Boto2 are in the s3tests directory. Tests written in Boto3 are
located in the s3test_boto3 directory.
You can run only the boto3 tests with::
S3TEST_CONF=your.conf tox -- s3tests/functional
========================
STS compatibility tests
This section contains some basic tests for the AssumeRole, GetSessionToken and AssumeRoleWithWebIdentity API's. The test file is located under s3tests/functional.
To run the STS tests, the vstart cluster should be started with the following parameter (in addition to any parameters already used with it)::
You can filter tests based on the attributes. There is a attribute named test_of_sts to run AssumeRole and GetSessionToken tests and webidentity_test to run the AssumeRoleWithWebIdentity tests. If you want to execute only test_of_sts tests you can apply that filter as below::
For running webidentity_test you'll need have Keycloak running.
In order to run any STS test you'll need to add "iam" section to the config file. For further reference on how your config file should look check s3tests.conf.SAMPLE.
========================
IAM policy tests
This is a set of IAM policy tests.
This section covers tests for user policies such as Put, Get, List, Delete, user policies with s3 actions, conflicting user policies etc
These tests uses Boto3 libraries. Tests are written in the s3test_boto3 directory.
These iam policy tests uses two users with profile name "iam" and "s3 alt" as mentioned in s3tests.conf.SAMPLE.
If Ceph cluster is started with vstart, then above two users will get created as part of vstart with same access key, secrete key etc as mentioned in s3tests.conf.SAMPLE.
Out of those two users, "iam" user is with capabilities --caps=user-policy=* and "s3 alt" user is without capabilities.
Adding above capabilities to "iam" user is also taken care by vstart (If Ceph cluster is started with vstart).
To run these tests, create configuration file with section "iam" and "s3 alt" refer s3tests.conf.SAMPLE.
Once you have that configuration file copied and edited, you can run all the tests with::
Ceph has extensions for the bucket logging S3 API. For the tests to cover these extensions, the following file: examples/rgw/boto3/service-2.sdk-extras.json from the Ceph repo,
should be copied to the: ~/.aws/models/s3/2006-03-01/ directory on the machine where the tests are run.
If the file is not present, the tests will still run, but the extension tests will be skipped. In this case, the bucket logging object roll time must be decreased manually from its default of
300 seconds to 5 seconds::
ceph/s3-tests có 373 sao GitHub — tải lại trang để xem số mới nhất, hoặc xem trực tiếp github.com/ceph/s3-tests. TopGit phản chiếu số sao của GitHub nhưng không cam kết đến từng phút.
ceph/s3-tests có tag gì không?
Bản đồng bộ chưa ghi nhận topic GitHub nào cho ceph/s3-tests. GitHub topics hiển thị ở thanh bên phải trang repo — đó là nơi đáng kiểm tra nhất.
ceph/s3-tests còn đang phát triển không?
Commit gần nhất trên ceph/s3-tests là 1 tháng trước (theo timestamp GitHub). Repo có 331 fork — một chỉ báo về mức độ quan tâm của cộng đồng.
ceph/s3-tests viết bằng ngôn ngữ gì?
ceph/s3-tests chủ yếu viết bằng Python. Trường "language" của GitHub dựa trên phần lớn byte ở nhánh mặc định.
Đọc thêm về ceph/s3-tests ở đâu?
Trang TopGit này là một snapshot — tab "Readme" hiển thị nguyên văn README của repo (đã bỏ link, giữ ảnh). Repo GitHub ở github.com/ceph/s3-tests là nguồn chính thức.
Đọc đầy đủ README ở tab phía trên.
Vẫn đang phân vân về s3-tests?
Một cú bấm sẽ gửi câu hỏi kèm trang này cho AI — xem AI nói gì về s3-tests.