cisco/openh264 được TopGit xếp vào nhóm dự án mã nguồn mở, với 6.2k sao trên GitHub, viết chủ yếu bằng C++. Open Source H.264 Codec
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
OpenH264 is a codec library which supports H.264 encoding and decoding. It is suitable for use in real time applications such as WebRTC. See http://www.openh264.org/ for more details.
Encoder Features
Constrained Baseline Profile up to Level 5.2 (Max frame size is 36864 macro-blocks)
Arbitrary resolution, not constrained to multiples of 16x16
Rate control with adaptive quantization, or constant quantization
Slice options: 1 slice per frame, N slices per frame, N macroblocks per slice, or N bytes per slice
Multiple threads automatically used for multiple slices
Temporal scalability up to 4 layers in a dyadic hierarchy
Simulcast AVC up to 4 resolutions from a single input
Spatial simulcast up to 4 resolutions from a single input
Long Term Reference (LTR) frames
Memory Management Control Operation (MMCO)
Reference picture list modification
Single reference frame for inter prediction
Multiple reference frames when using LTR and/or 3-4 temporal layers
Periodic and on-demand Instantaneous Decoder Refresh (IDR) frame insertion
Dynamic changes to bit rate, frame rate, and resolution
Annex B byte stream output
YUV 4:2:0 planar input
Decoder Features
Constrained Baseline Profile up to Level 5.2 (Max frame size is 36864 macro-blocks)
Arbitrary resolution, not constrained to multiples of 16x16
Single thread for all slices
Long Term Reference (LTR) frames
Memory Management Control Operation (MMCO)
Reference picture list modification
Multiple reference frames when specified in Sequence Parameter Set (SPS)
Annex B byte stream input
YUV 4:2:0 planar output
OS Support
Windows 64-bit and 32-bit
Mac OS X 64-bit and 32-bit
Mac OS X ARM64
Linux 64-bit and 32-bit
Android 64-bit and 32-bit
iOS 64-bit and 32-bit
Windows Phone 32-bit
Architectures verified to be working
ppc64el
Processor Support
Intel x86 optionally with MMX/SSE (no AVX yet, help is welcome)
ARMv7 optionally with NEON, AArch64 optionally with NEON
Any architecture using C/C++ fallback functions
Building the Library
NASM needed to be installed for assembly code: workable version 2.10.06 or above, NASM can be downloaded from http://www.nasm.us/.
For Mac OSX 64-bit NASM needed to be below version 2.11.08 as NASM 2.11.08 will introduce error when using RIP-relative addresses in Mac OSX 64-bit
To build the arm assembly for Windows Phone, gas-preprocessor is required. It can be downloaded from git://git.libav.org/gas-preprocessor.git
For Android Builds
To build for android platform, You need to install android sdk and ndk. You also need to export **ANDROID_SDK**/tools to PATH. On Linux, this can be done by
export PATH=**ANDROID_SDK**/tools:$PATH
The codec and demo can be built by
make OS=android NDKROOT=**ANDROID_NDK** TARGET=**ANDROID_TARGET**
Valid **ANDROID_TARGET** can be found in **ANDROID_SDK**/platforms, such as android-12.
You can also set ARCH, NDKLEVEL according to your device and NDK version.
ARCH specifies the architecture of android device. Currently arm, arm64, x86 and x86_64 are supported, the default is arm. (mips and mips64 can also be used, but there's no specific optimization for those architectures.)
NDKLEVEL specifies android api level, the default is 12. Available possibilities can be found in **ANDROID_NDK**/platforms, such as android-21 (strip away the android- prefix).
By default these commands build for the armeabi-v7a ABI. To build for the other android
ABIs, add ARCH=arm64, ARCH=x86, ARCH=x86_64, ARCH=mips or ARCH=mips64.
To build for the older armeabi ABI (which has armv5te as baseline), add APP_ABI=armeabi (ARCH=arm is implicit).
To build for 64-bit ABI, such as arm64, explicitly set NDKLEVEL to 21 or higher.
For iOS Builds
You can build the libraries and demo applications using xcode project files
located in codec/build/iOS/dec and codec/build/iOS/enc.
You can also build the libraries (but not the demo applications) using the
make based build system from the command line. Build with
make OS=ios ARCH=**ARCH**
Valid values for **ARCH** are the normal iOS architecture names such as
armv7, armv7s, arm64, and i386 and x86_64 for the simulator.
Another settable iOS specific parameter
is SDK_MIN, specifying the minimum deployment target for the built library.
For other details on building using make on the command line, see
'For All Platforms' below.
For Linux Builds
You can build the libraries (but not the demo applications) using the
make based build system from the command line. Build with
make OS=linux ARCH=**ARCH**
You can set ARCH according to your linux device .
ARCH specifies the architecture of the device. Currently arm, arm64, x86 and x86_64 are supported
NOTICE:
If your computer is x86 architecture, for build the libnary which be used on arm/aarch64 machine, you may need to use cross-compiler, for example:
make OS=linux CC=aarch64-linux-gnu-gcc CXX=aarch64-linux-gnu-g++ ARCH=arm64
or
make OS=linux CC=arm-linux-gnueabi-gcc CXX=arm-linux-gnueabi-g++ ARCH=arm
For Windows Builds
"make" must be installed. It is recommended to install the Cygwin and "make" must be selected to be included in the installation. After the installation, please add the Cygwin bin path to your PATH.
openh264/build/AutoBuildForWindows.bat is provided to help compile the libraries on Windows platform.
Usage of the .bat script:
`AutoBuildForWindows.bat Win32-Release-ASM` for x86 Release build
`AutoBuildForWindows.bat Win64-Release-ASM` for x86_64 Release build
`AutoBuildForWindows.bat ARM64-Release-ASM` for arm64 release build
for more usage, please refer to the .bat script help.
For All Platforms
Using make
From the main project directory:
make for automatically detecting architecture and building accordingly
make ARCH=i386 for x86 32-bit builds
make ARCH=x86_64 for x86 64-bit builds
make ARCH=arm64 for arm64 Mac 64-bit builds
make V=No for a silent build (not showing the actual compiler commands)
make DEBUGSYMBOLS=True for two libraries, one is normal libraries, another one is removed the debugging symbol table entries (those created by the -g option)
The command line programs h264enc and h264dec will appear in the main project directory.
A shell script to run the command-line apps is in testbin/CmdLineExample.sh
Usage information can be found in testbin/CmdLineReadMe
Using meson
Meson build definitions have been added, and are known to work on Linux
and Windows, for x86 and x86 64-bit.
See http://mesonbuild.com/Installing.html for instructions on how to
install meson, then:
cisco/openh264 có 6.2k sao GitHub — tải lại trang để xem số mới nhất, hoặc xem trực tiếp github.com/cisco/openh264. TopGit phản chiếu số sao của GitHub nhưng không cam kết đến từng phút.
cisco/openh264 có tag gì không?
Bản đồng bộ chưa ghi nhận topic GitHub nào cho cisco/openh264. GitHub topics hiển thị ở thanh bên phải trang repo — đó là nơi đáng kiểm tra nhất.
cisco/openh264 còn đang phát triển không?
Commit gần nhất trên cisco/openh264 là 27 ngày trước (theo timestamp GitHub). Repo có 2.0k fork — một chỉ báo về mức độ quan tâm của cộng đồng.
cisco/openh264 là gì?
cisco/openh264 (cisco/openh264) là dự án C++ trên GitHub. Theo mô tả gốc: Open Source H.264 Codec
cisco/openh264 viết bằng ngôn ngữ gì?
cisco/openh264 chủ yếu viết bằng C++. Trường "language" của GitHub dựa trên phần lớn byte ở nhánh mặc định.
Đọc đầy đủ README ở tab phía trên.
Chưa chắc openh264 có hợp với bạn?
Để ChatGPT, Claude hoặc Perplexity tìm hiểu giúp — bấm bên dưới và xem AI nói gì về openh264.