google/seesaw được TopGit xếp vào nhóm dự án mã nguồn mở, với 5.7k sao trên GitHub, viết chủ yếu bằng Go. Seesaw v2 is a Linux Virtual Server (LVS) based load balancing platform.
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
Seesaw v2 is a Linux Virtual Server (LVS) based load balancing platform.
It is capable of providing basic load balancing for servers that are on the
same network, through to advanced load balancing functionality such as anycast,
Direct Server Return (DSR), support for multiple VLANs and centralised
configuration.
Above all, it is designed to be reliable and easy to maintain.
Requirements
A Seesaw v2 load balancing cluster requires two Seesaw nodes - these can be
physical machines or virtual instances. Each node must have two network
interfaces - one for the host itself and the other for the cluster VIP. All
four interfaces should be connected to the same layer 2 network.
Building
Seesaw v2 is developed in Go and depends on several Go packages:
golang.org/x/crypto/ssh
github.com/dlintw/goconf
github.com/golang/glog
github.com/golang/protobuf/proto
github.com/miekg/dns
Additionally, there is a compile and runtime dependency on
libnl
On a Debian/Ubuntu style system, you should be able to prepare for building
by running:
If your distro has a go version before 1.18, you may need to fetch a newer
release from https://golang.org/dl/.
If you are running before go version 1.11 or you want to set GO111MODULE=off,
after setting GOPATH to an appropriate location (for example ~/go):
go get -u golang.org/x/crypto/ssh
go get -u github.com/dlintw/goconf
go get -u github.com/golang/glog
go get -u github.com/miekg/dns
go get -u github.com/kylelemons/godebug/pretty
go get -u github.com/golang/protobuf/proto
Ensure that ${GOPATH}/bin is in your ${PATH} and in the seesaw directory:
make test
make install
If you wish to regenerate the protobuf code, the protobuf compiler is needed:
apt-get install protobuf-compiler
The protobuf code can then be regenerated with:
make proto
Installing
After make install has run successfully, there should be a number of
binaries in ${GOPATH}/bin with a seesaw_ prefix. Install these to the
appropriate locations:
SEESAW_BIN="/usr/local/seesaw"
SEESAW_ETC="/etc/seesaw"
SEESAW_LOG="/var/log/seesaw"
INIT=`ps -p 1 -o comm=`
install -d "${SEESAW_BIN}" "${SEESAW_ETC}" "${SEESAW_LOG}"
install "${GOPATH}/bin/seesaw_cli" /usr/bin/seesaw
for component in {ecu,engine,ha,healthcheck,ncc,watchdog}; do
install "${GOPATH}/bin/seesaw_${component}" "${SEESAW_BIN}"
done
if [ $INIT = "init" ]; then
install "etc/init/seesaw_watchdog.conf" "/etc/init"
elif [ $INIT = "systemd" ]; then
install "etc/systemd/system/seesaw_watchdog.service" "/etc/systemd/system"
systemctl --system daemon-reload
fi
install "etc/seesaw/watchdog.cfg" "${SEESAW_ETC}"
# Enable CAP_NET_RAW for seesaw binaries that require raw sockets.
/sbin/setcap cap_net_raw+ep "${SEESAW_BIN}/seesaw_ha"
/sbin/setcap cap_net_raw+ep "${SEESAW_BIN}/seesaw_healthcheck"
The setcap binary can be found in the libcap2-bin package on Debian/Ubuntu.
Configuring
Each node needs a /etc/seesaw/seesaw.cfg configuration file, which provides
information about the node and who its peer is. Additionally, each load
balancing cluster needs a cluster configuration, which is in the form of a
text-based protobuf - this is stored in /etc/seesaw/cluster.pb.
An example seesaw.cfg file can be found in
etc/seesaw/seesaw.cfg.example - a minimal
seesaw.cfg provides the following:
anycast_enabled - True if anycast should be enabled for this cluster.
name - The short name of this cluster.
node_ipv4 - The IPv4 address of this Seesaw node.
peer_ipv4 - The IPv4 address of our peer Seesaw node.
vip_ipv4 - The IPv4 address for this cluster VIP.
The VIP floats between the Seesaw nodes and is only active on the current
master. This address needs to be allocated within the same netblock as both
the node IP address and peer IP address.
An example cluster.pb file can be found in
etc/seesaw/cluster.pb.example - a minimal
cluster.pb contains a seesaw_vip entry and two node entries. For each
service that you want to load balance, a separate vserver entry is
needed, with one or more vserver_entry sections (one per port/proto pair),
one or more backends and one or more healthchecks. Further information
is available in the protobuf definition - see
pb/config/config.proto.
On an upstart based system, running restart seesaw_watchdog will start (or
restart) the watchdog process, which will in turn start the other components.
Anycast
Seesaw v2 provides full support for anycast VIPs - that is, it will advertise
an anycast VIP when it becomes available and will withdraw the anycast VIP if
it becomes unavailable. For this to work the Quagga BGP daemon needs to be
installed and configured, with the BGP peers accepting host-specific routes
that are advertised from the Seesaw nodes within the anycast range (currently
hardcoded as 192.168.255.0/24).
Command Line
Once initial configuration has been performed and the Seesaw components are
running, the state of the Seesaw can be viewed and controlled via the Seesaw
command line interface. Running seesaw (assuming /usr/bin is in your path)
will give you an interactive prompt - type ? for a list of top level
commands. A quick summary:
config reload - reload the cluster.pb from the current config source.
failover - failover between the Seesaw nodes.
show vservers - list all vservers configured on this cluster.
show vserver <name> - show the current state for the named vserver.
Troubleshooting
A Seesaw should have five components that are running under the watchdog - the
process table should show processes for:
seesaw_ecu
seesaw_engine
seesaw_ha
seesaw_healthcheck
seesaw_ncc
seesaw_watchdog
All Seesaw v2 components have their own logs, in addition to the logging
provided by the watchdog. If any of the processes are not running, check the
corresponding logs in /var/log/seesaw (e.g. seesaw_engine.{log,INFO}).
google/seesaw có 5.7k sao GitHub — tải lại trang để xem số mới nhất, hoặc xem trực tiếp github.com/google/seesaw. TopGit phản chiếu số sao của GitHub nhưng không cam kết đến từng phút.
google/seesaw có tag gì không?
Bản đồng bộ chưa ghi nhận topic GitHub nào cho google/seesaw. GitHub topics hiển thị ở thanh bên phải trang repo — đó là nơi đáng kiểm tra nhất.
google/seesaw còn đang phát triển không?
Commit gần nhất trên google/seesaw là 7 ngày trước (theo timestamp GitHub). Repo có 504 fork — một chỉ báo về mức độ quan tâm của cộng đồng.
google/seesaw là gì?
google/seesaw (google/seesaw) là dự án Go trên GitHub. Theo mô tả gốc: Seesaw v2 is a Linux Virtual Server (LVS) based load balancing platform.
google/seesaw viết bằng ngôn ngữ gì?
google/seesaw chủ yếu viết bằng Go. Trường "language" của GitHub dựa trên phần lớn byte ở nhánh mặc định.
Đọc đầy đủ README ở tab phía trên.
Chưa chắc seesaw có hợp với bạn?
Để ChatGPT, Claude hoặc Perplexity tìm hiểu giúp — bấm bên dưới và xem AI nói gì về seesaw.