philippe44/AirConnect

AirConnect: Send audio to UPnP/Sonos/Chromecast players using AirPlay

Use these applications to add AirPlay capabilities to Chromecast and UPnP (like Sonos) players, to make them appear as AirPlay devices.

AirConnect can run on any machine that has access to your local network (Windows, MacOS x86 and arm64, Linux x86, x86_64, arm, aarch64, sparc, mips, powerpc, Solaris and FreeBSD). It does not need to be on your main computer. (For example, a Raspberry Pi works well). It will detect UPnP/Sonos/Chromecast players, create as many virtual AirPlay devices as needed, and act as a bridge/proxy between AirPlay clients (iPhone, iPad, iTunes, MacOS, AirFoil ...) and the real UPnP/Sonos/Chromecast players.

The audio, after being decoded from alac, can be sent in plain, or re-encoded using mp3, aac or flac. Most players will not display metadata (artist, title, album, artwork ...) except when mp3 or aac re-encoding are used and for UPnP/DLNA devices that support icy protocol. Chromecast players support this after version 1.1.x

Installing

1. Pre-built binaries are in AirConnect-<X.Y.Z>.zip. It can be downloaded manually in a terminal by typing wget https://raw.githubusercontent.com/philippe44/AirConnect/master/AirConnect-<X.Y.Z>.zip. Unzip the file an select the binary that works for your system.

   • For Chromecast, the file is aircast-<os>-<cpu> (so aircast-macos-x86_64 for Chromecast on MacOS + Intel CPU)
   • For UPnP/Sonos, the file is airupnp-<os>-<cpu> (so airupnp-macos-arm64 for UPnP/Sonos on MacOS + arm CPU)

2. There is a "-static" version of each application that has all static libraries built-in. Use of these is (really) not recommended unless the regular version fails. For MacOS users, you need to install openSSL and do the following steps to use the dynamic load library version:

   • install openssl: brew install openssl. This creates libraries (or at least links) into /usr/local/opt/openssl[/x.y.z]/lib where optional 'x.y.z' is a version number
   • create links to these libraries:

   ln -s /usr/local/opt/openssl[/x.y.z]/lib/libcrypto.dylib /usr/local/lib/libcrypto.dylib 
   ln -s /usr/local/opt/openssl[/x.y.z]/lib/libssl.dylib /usr/local/lib/libssl.dylib 
   

3. For Windows, install the Microsoft VC++ redistributable found here You will also need to grab the 2 dlls files and put them in the same directory as the exe file

4. Store the <executable> (e.g. airupnp-linux-aarch64) in any directory.

5. On non-Windows machines, open a terminal and change directories to where the executable is stored and run chmod +x <executable> (Example: chmod +x airupnp-macos). File permissions might need to be set.

6. Don't use firewall or set ports using options below and open them.

   • Port 5353 (UDP) is needed to listen to mDNS messages
   • Each device uses 1 port permanently (RTSP) and when playing adds 1 port for HTTP and 3 ports for RTP (use -gor <ports> parameter, default is random)
   • UPnP adds one extra port for discovery (use -b or <upnp_socket> parameter, default is 49152 and user value must be above this)

7. @faserF has made a script for install/update ter)

8. In Docker, you must use 'host' mode to enable audio webserver. Note that you can't have a NAT between your devices and the machine where AirConnect runs.

Running

Double click the <executable> or launch it by typing ./<executable> in the same command line window.

For Sonos & Heos players, set latency by adding -l 1000:2000 on the command line. (Example: ./airupnp-macos -l 1000:2000)

You should start to see lots of log messages on screen. Using your iOS/Mac/iTunes/Airfoil/other client, you should now see new AirPlay devices and can try to play audio to them.

If it works, type exit, which terminates the executable, and then, on non-Windows/MacOS machines, relaunch it with -z so that it can run in the background and you can close the command line window. You can also start it automatically using any startup script or a Linux service as explained below. Nothing else should be required, no library or anything to install.

For each platform, there is a normal and a '-static' version. This one includes all libraries directly inside the application, so normally there is no dependence to 3rd party shared libraries, including SSL. You can try it if the normal fails to load (especially on old systems), but static linkage is a blessing a curse (exact reasons out of scope of this README). Now, if the static version still does not work, there are other solutions that are pretty technical, see here. Best is that you open an issue if you want help with that.

Common information:

Use -h for command line details

• When started in interactive mode (w/o -Z or -z option) a few commands can be typed at the prompt
  • exit
  • save <file> : save the current configuration in file named [name]
• Volume changes made in native control applications are synchronized with AirPlay client
• Pause, Stop, Next, Prev using native control application are sent to AirPlay client - once paused, "native" play will not work
• Re-scan for new / lost players happens every 30s
• A config file (default config.xml) can be created for advanced tweaking (a reference version can be generated using the -i <file> command line)
• Chromecast groups are supported. Use -v to set the media volume factor for all devices (0.5 by default)
• use -c mp3[:<rate>]|aac[:<rate>]|flac[:0..9][/1152...16384]|wav|pcm to set codec use for re-encoding audio. See below for more explanation
• When you have more than one ethernet card, you case use -b [ip] to set what card to bind to. Note that 0.0.0.0 is not authorized
• Use -u <version> to set the maximum UPnP searched version
• Use -b [ip|iface][:port] to set network interface (ip@ or interface name as reported by ifconfig/ipconfig) to use and, for airupnp only, UPnP port to listen to (must be above the default 49152)
• Use -a <port>[:<count>] to specify a port range (default count is 128, sets RTP and HTTP ports)
• Use -g -3|-1|0| to tweak http transfer mode where -3 = chunked, -1 = no content-length and 0 = fixed (dummy) length (see "HTTP content-length" below)"
• Use -N "<format>" to change the default name of AirPlay players (the player name followed by '+' by default). It's a C-string format where '%s' is the player's name, so default is "%s+"
• Use -S <broadcast[radio|track> to enable streaming mode for Sonos players
• Use of -z disables interactive mode (no TTY) and self-daemonizes (use -p <file> to get the PID). Use of -Z only disables interactive mode
• Do not daemonize (using & or any other method) the executable w/o disabling interactive mode (-Z), otherwise it will consume all CPU. On Linux, FreeBSD and Solaris, best is to use -z. Note that -z option is not available on MacOS or Windows
• A 'click' noise can be heard when timings are adjusted by adding or skipping one 8ms frame. Use -r to disable such adjustments (or use <drift> option in config file), but that might cause overrun or underrun on long playbacks
• This is an audio-only application. Do not expect to play a video on your device and have the audio from UPnP/Sonos or ChromeCast synchronized. It does not, cannot and will not work, regardless of any latency parameter. Please do not open tickets requesting this (see details below to understand why)

Config file parameters

The default configuration file is config.xml, stored in the same directory as the <executable>. Each of parameters below can be set in the <common> section to apply to all devices. It can also be set in any <device> section to apply only to a specific device and overload the value set in <common>. Use the -x <config>command line option to use a config file of your choice.

• latency <[rtp][:http][:f]> : (default: (0:0))buffering tweaking, needed when audio is shuttering or for bad networks (delay playback start)
  • [rtp] : ms of buffering of RTP (AirPlay) audio. Below 500ms is not recommended. 0 = use value from AirPlay. A negative value force sending of silence frames when no AirPlay audio has been received after 'RTP' ms, to force a continuous stream. If not, the UPnP/CC player will be not receive audio and some might close the connection after a while, although most players will simply be silent until stream restarts. This shall not be necessary in most of the case.
  • [http] : ms of buffering silence for HTTP audio (not needed normally, except for Sonos)
  • [f] : when network congestion happens, source frames will not be received at all. Set this parameter to force sending silence frame then. Otherwise, no HTTP data will be sent and player might close the connection
• drift <0|1> : enable adding or dropping a frame when case source frames producion is too fast or too slow
• enabled <0|1> : in common section, enables new discovered players by default. In a dedicated section, enables the player
• name : The name that will appear for the device in AirPlay. You can change the default name.
• upnp_max : set the maximum UPnP version use to search players (default 1)
• http_length : same as -g command line parameter
• `stream_type' <broadcast|track|radio> : set the type of stream Sonos players should expect (default Broadcast) so that they don't wait to buffer enough data before playing
• metadata <0|1> : send metadata to player (only for mp3 and aac codecs and if player supports ICY protocol)
• artwork : an URL to an artwork to be displayed on player
• flush <0|1> : (default 1) set AirPlay FLUSH commands response (see also --noflush in Misc tips section)
• media_volume <0..1> : (default 0.5) Applies a scaling factor to device's hardware volume (chromecast only)
• codec <mp3[:<bitrate(192)>]|aac[:<bitrate(128)>]|flac[:0..9(5)][/1152...16384(4096)]|wav|pcm> : format used to send HTTP audio. FLAC is recommended but uses more CPU (pcm only available for UPnP). For example, mp3:320 for 320Kb/s MP3 encoding. Flac's second parameter is blocksize that can be reduced to 1152 for lower latency.

These are the global parameters

• max_players : set the maximum of players (default 32)
• log_limit <-1 | n> : (default -1) when using log file, limits its size to 'n' MB (-1 = no limit)
• ports <port>[:<count>] : set port range to use (see -a)

Start automatically in Linux

1. Create a file in /etc/systemd/system, e.g. airupnp.service with the following content (assuming the airupnp binary is in /var/lib/airconnect)

[Unit]  
Description=AirUPnP bridge  
After=network-online.target  
Wants=network-online.target  

[Service]  
ExecStart=/var/lib/airconnect/airupnp-linux-arm -l 1000:2000 -Z -x /var/lib/airconnect/airupnp.xml   
Restart=on-failure  
RestartSec=30  

[Install]  
WantedBy=multi-user.target   

2. Enable the service sudo systemctl enable airupnp.service

3. Start the service sudo service airupnp start

To start or stop the service manually, type sudo service airupnp start|stop in a command line window

To disable the service, type sudo systemctl disable airupnp.service

To view the log, journalctl -u airupnp.service

On rPi lite, add the following to the /boot/cmdline.txt: init=/bin/systemd

Obviously, from the above example, only use -x if you want a custom configuration. Thanks @cactus for systemd cleaning

@1activegeek has made a docker container here that follows the update of this repository - thanks!

Start automatically in MacOS (credits @aiwipro)

Create the file com.aircast.bridge.plist in ~/Library/LaunchAgents/

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Label</key>
    <string>com.aircast.bridge</string>
    <key>ProgramArguments</key>
    <array>
        <string>/[path]/aircast-macos</string>
	<string>-Z</string>
        <string>-x</string>
        <string>/[path]/aircast.xml</string>
        <string>-f</string>
        <string>/[path]/aircast.log</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>LaunchOnlyOnce</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
</dict>
</plist>

Where [path] is the path where you've stored the aircast executable (without the []). It can be for example Users/xxx/airconnect where xxx is your user name

Start automatically under Windows

There are many tools that allow an application to be run as a service. You can try this one

Synology installation

@eizedev is now maintaining a package for automatic installation & launch of airupnp on Syno's here

Player specific hints and tips

Sonos

The upnp version is often used with Sonos players. When a Sonos group is created, only the master of that group will appear as an AirPlay player and others will be removed if they were already detected. If the group is later split, then individual players will re-appear.

When changing volume of a group, each player's volume is changed trying to respect the relative values. It's not perfect and still under test now. To reset all volumes to the same value, simply move the cursor to 0 and then to the new value. All players will have the same volume then. You need to use the Sonos application to change individual volumes.

To identify your Sonos players, pick an identified IP address, and visit the Sonos status page in your browser, like http://192.168.1.126:1400/support/review. Click Zone Players and you will see the identifiers for your players in the UUID column.

Bose SoundTouch

@chpusch has found that Bose SoundTouch work well including synchronisation (as for Sonos, you need to use Bose's native application for grouping / ungrouping). I don't have a SoundTouch system so I cannot do the level of slave/master detection I did for Sonos

Pioneer/Phorus/Play-Fi

Some of these speakers only support mp3

Misc tips

• When players disappear regularly, it might be that your router is filtering out multicast packets. For example, for a Asus AC-RT68U, you have to login by ssh and run echo 0 > /sys/class/net/br0/bridge/multicast_snooping but it does not stay after a reboot.

• Lots of users seems to have problem with Unify and broadcasting / finding players. Here is a guide https://www.neilgrogan.com/ubnt-sonos/ made by somebody who fixes the issue for his Sonos

• Some AirPlay controller send a FLUSH and immediately start sending new audio when skipping track. This causes AirConnect to issue a STOP and almost immediately a PLAY command which seems to be a problem for certain players (Sonos in some cases). A possible workaround is to ignore FLUSH request (see config file or use --noflush on the command line) but this has side effect on pause as silence frames are sent. At best restart is delayed and worse case it might not work with some codec (flac)

• Some older Avahi distributions grab the port mDNS port 5353 for exclusive use, preventing AirConnect to respond to queries. Please set disallow-other-stacks=noin /etc/avahi/avahi-daemon.conf

• If the non-static version fails to load complaining that GLIBCXX_3.4.29 is missing, please have a look there and use the existing libraries I've provided in that repository. You can simply copy the right libstdc++.so.6.0.29 in the directory where AirConnect is and create symlink for libstdc++.so and libstdc++.so.6, then use the LD_LIBRARY_PATH='$ORIGIN' <app> trick, it will work without messing anything in your system.

HTTP & UPnP specificities

HTTP content-length and transfer modes

Lots of UPnP player have very poor quality HTTP and UPnP stacks, in addition of UPnP itself being a poorly defined/certified standard. One of the main difficulty comes from the fact that AirConnect cannot provide the length of the file being streamed as the source is an infinite real time RTP flow coming from the AirPlay source.

The HTTP standard is clear that the "content-length" header is optional and can be omitted when server does not know the size of the source. If the client is HTTP 1.1 there is another possibility which is to use "chunked" mode where the body of the message is divided into chunks of variable length. This is explicitly made for case of unknown source length and an HTTP client that claims to support 1.1 must support chunked-encoding.

The default mode of AirUPnP is "no content-length" (<http_length> = -1) but unfortunately, some players can't deal with that. You can then try "chunked-encoding" (<http_length> = -3) but some players who claim to be HTTP 1.1 do not support it. There is a last resort option to add a large fake content-length (<http_length> = 0). It is set to 2^31-1, so around 5 hours of playback with flac re-encoding. Note that if player is HTTP 1.0 and http_header is set to -3, AirUPnP will fallback no content-length. The command line option -g has the same effect that <http_length> in the <common> section of a config file.

This might still not work as some players do not understand that the source is not a randomly accessible (searchable) file and want to get the first(e.g.) 128kB to try to do some smart guess on the length, close the connection, re-open it from the beginning and expect to have the same content. I'm trying to keep a buffer of last recently sent bytes to be able to resend-it, but that does not always works. Normally, players should understand that when they ask for a range and the response is 200 (full content), it means the source does not support range request but some don't (I've tried to add a header "accept: no-range but that makes things worse most of the time).

Delay when switching track or source

I've received that question many times: why is there (sometimes) many seconds of delay when I switch track (or source) from my iPhone before I hear the change?

To understand, it's better that you read the next paragraph, but as you probably won't, here is a quick summary of how AirPlay works. As far as the sender (e.g. your iPhone) is concerned, once the connection with an AirPlay 'speaker' is established, this connection is almost like a analogue wire with a delay (buffer) of 1 or 2 seconds.

What iOS does nowadays is that when you switch between tracks, instead of closing the connection and re-creating one, it just pushes the new audio through the existing connection, so you might have the 1~2 seconds of previous audio in the pipe before the new audio plays. Same thing when stopping/pausing playback, iOS simply stops pushing audio through the wire.

There is a function to "flush" the audio in the pipe so that new audio plays immediately, but I've seen that recent versions of iOS don't use it anymore (or some applications decide to not flush while they could). That's not a big deal with most AirPlay speakers, it's a 1~2 second delay.

But with AirConnect, the AirPlay speaker is not a speaker, it's a UPnP or Chromecast player. They do not at all act like virtual wires, they instead expect to have the whole track available as a file and retrieve data from it as needed. In fact, one of the key functions that AirConnect does is looking like a wire to iPhone and looking like a file to the UPnP/CC.

Usually, UPnP/CC players consume a large chunk of that 'file' before they start to play to handle network congestion, but some don't and simply start playing at the first received byte, counting that the large chunk will come quickly. But that chunk/buffer does not exist for AirConnect as audio is produced in real time by the iPhone. So if a player starts at the first byte, it will very likely lack audio data when a network congestion occurs and playback will stutter. The parameter http latency solves this issue by creating a silence buffer sent in a burst when establishing a connection, but this creates a permanent delay between the iPhone and the player. Some UPnP/CC players wait to have buffered enough data before they start playing and again, because that data is built in real time by AirConnect, this other delay adds up to the latency parameter (even if http latency is 0).

When you switch between tracks or sources (or pause/stop), if your iPhone sends this "flush" command, then AirConnect immediately stops the UPnP/CC player. But if there is no flush command, it will play until these silence + self buffers are consumed ... that can be more than a few seconds.

In addition the delay can increase with time depending of clock speed difference between the iPhone and the UPnP/CC. Say that the iPhone's clock is 1% faster than the player's clock, then when it has produced 300s (5mins) of audio, the player has received it all but it has only played 297s, so there is an additional delay of 3s. If the iPhone moves track without the flush command, then the UPnP/CC player will start playing new audio (or stop) http latency + self-buffer length + 3 seconds later ... that can be a lot!

Unfortunately, there is nothing I can do about that. By not using the "flush" command, iOS or application using AirPlay create an issue that AirConnect has no way to identify or avoid.

Latency parameters explained:

These bridges receive realtime "synchronous" audio from the AirPlay controller in the format of RTP frames and forward it to the Chromecast/UPnP/Sonos player in an HTTP "asynchronous" continuous audio binary format (notion of frames does not exist on that side). In other words, the AirPlay clients "push" the audio using RTP and the Chromecast/UPnP/Sonos players "pull" the audio using an HTTP GET request.

A player using HTTP to get its audio expects to receive an initial large portion of audio as the response to its GET and this creates a large enough buffer to handle most further network congestion/delays. The rest of the audio transmission is regulated by the player using TCP flow control. But when the source is an AirPlay RTP device, there is no such large portion of audio available in advance to be sent to the Player, as the audio comes to the bridge in real time. Every 8ms, a RTP frame is received and is immediately forwarded as the continuation of the HTTP body. If the CC/UPnP/Sonos players starts to play immediately the 1st received audio sample, expecting an initial burst to follow, then any network congestion delaying RTP audio will starve the player and create shuttering.

The [http] parameter allow a certain amount of silence frames to be sent to the Chromecast/UPnP/Sonos player, in a burst at the beginning. Then, while this "artificial" silence is being played, it's possible for the bridge to build a buffer of RTP frames that will then hide network delays that might happen in further RTP frames transmission. This delays the start of the playback by [http] ms.

But RTP frames are transmitted using UDP, which means there is no guarantee of delivery, so frames might be lost from time to time (happens often on WiFi networks). To allow detection of lost frames, they are numbered sequentially (1,2 ... n) so every time two received frames are not consecutive, the missing ones can be requested again by the AirPlay receiver.

Normally, the bridge forwards immediately every RTP frame using HTTP and again, in HTTP, the notion of frame numbers does not exit, it's just the continuous binary audio. So it's not possible to send audio non-sequentially when using HTTP

For example, if received RTP frames are numbered 1,2,3,6, this bridge will forward (once decoded and transformed into raw audio) 1,2,3 immediately using HTTP but when it receives 6, it will re-request 4 and 5 to be resent and hold 6 while waiting (if 6 were to be transmitted immediately, the Chromecast/UPnP/Sonos will play 1,2,3,6 ... not nice). The [rtp] parameter sets for how long frame 6 shall be held before adding two silence frames for 4 and 5 and send sending 4,5,6. Obviously, if this delay is larger than the buffer in the Chromecast/UPnP/Sonos player, playback will stop by lack of audio. Note that [rtp] does not delay playback start.

When [f] is set, silence frames will be inserted as soon as no RTP frames have been received during [rtp] ms. This ensure that a continuous stream of audio is available on the HTTP server. This might be necessary for some players that close the HTTP connection if they have not received data for some time. It's unlikely though. Note that otherwise when RTP stream is interrupted for more than [http] ms, the UPnP/CC player will stop anyway as it will have empty buffers. Still, as soon as the RTP stream resumes, the bridge will receive frame N, where the last received one might be N-500. So it will request the (up to) [rtp] missing ones (might be less than 500), and restart playing at N-[http], so potentially silence will be inserted.

Many have asked for a way to do video/audio synchronisation so that UPnP (Sonos) players can be used as speakers when playing video on a computer or tablet (YouTube for example). Due to this RTP-to-HTTP bridging, this cannot be done as the exact time when an audio frame is played cannot be controlled on the HTTP client. AirPlay speakers can achieve that because the iPhone/iPad/MAC player will "delay" the video by a known amount, send the audio in advance (usually 2 sec) and then control the exact time when this audio is output by the speaker. But although AirConnect has the exact request timing and maintains synchronization with the player, it cannot "relay" that synchronization to the speakers. UPnP protocol does not allow this and Sonos has not made their protocol public. Sometimes you might get lucky because the video-to-audio delay will almost match the HTTP player delay, but it is not reproductible and will not be stable over time.

Compiling from source

It's a Makefile-oriented build, and there is a bash script (built.sh) and Windows one (build.cmd). The bash script is intended for cross-platform build and you might be able to call directly your native compiler, but have a look at the command line in the build.sh to make sure it can work.

Please see here to know how to rebuild my apps in general:

Otherwise, you can just get the source code and pre-built binaries:

cd ~
git clone http://github.com/philippe44/airconnect
cd ~/airconnect
git submodule update --init

NB: you can speed up all clonings by a lot by adding --depth 1 option to just to a shallow clone (you probably don't need all the commits)

and build doing:

cd ~/airconnect/airupnp
make