qbittorrent/docker-qbittorrent-nox

qBittorrent-nox Docker Image

Repository on Docker Hub: https://hub.docker.com/r/qbittorrentofficial/qbittorrent-nox
Repository on GitHub: https://github.com/qbittorrent/docker-qbittorrent-nox

Supported architectures

• linux/386
• linux/amd64
• linux/arm/v6
• linux/arm/v7
• linux/arm64/v8
• linux/riscv64

Reporting bugs

If the problem is related to Docker, please report it to this repository:
https://github.com/qbittorrent/docker-qbittorrent-nox/issues

If the problem is with qBittorrent, please report the issue to its main repository:
https://github.com/qbittorrent/qBittorrent/issues

Usage

0. Prerequisites

In order to run this image you will need Docker installed: https://docs.docker.com/get-docker/

If you don't need the GUI, you can just install Docker Engine: https://docs.docker.com/engine/install/

It is also recommended to install Docker Compose as it can simplify the process significantly: https://docs.docker.com/compose/install/

1. Download this repository

You can either git clone this repository or download it as a zip archive.

2. Edit Docker environment file

If you are using Docker Stack, refer to docker-stack.yml file as an example.
It is an almost ready-to-use configuration, though a few variables need to be filled in. Make sure you read the following steps as they largely share the same concept.

If you are not using Docker Compose, you can skip editing the environment file. However, the variables presented below are crucial for later steps, so make sure you understand them.

Find and open the .env file in the repository you cloned (or the .zip archive you downloaded).
There are a few variables that you must set before you can run the image.
You can find the meanings of these variables in the following section. Make sure you understand every one of them.

Environment variables

• QBT_LEGAL_NOTICE
  Confirm that you have read qBittorrent's legal notice.
  Put confirm only if you have read the legal notice.
• QBT_VERSION
  The version of qBittorrent-nox to use.
  It can be the latest stable version: latest, a tagged version: 4.4.5-1 or the bleeding-edge weekly build: alpha.
  An lt1 variation that uses libtorrent v1.2.x is also available. If you are a heavy seeder, you may want to choose this variation for better seeding performance.
• QBT_TORRENTING_PORT
  The port number for torrenting traffic.
  Defaults to port 6881 if value is not set.
• QBT_WEBUI_PORT
  The port number for qBittorrent WebUI.
  Defaults to port 8080 if value is not set.

Volumes

• <your_path>/config
  Full path to a folder on your host machine which will store qBittorrent configurations. Using a relative path will not work.
• <your_path>/downloads
  Full path to a folder on your host machine which will store the files downloaded by qBittorrent. Using a relative path will not work.

3. Running the image

• If using Docker (not Docker Compose), edit the variables and run:

  export \
    QBT_LEGAL_NOTICE=<put_confirm_here> \
    QBT_VERSION=latest \
    QBT_TORRENTING_PORT=6881 \
    QBT_WEBUI_PORT=8080 \
    QBT_CONFIG_PATH="<your_path>/config" \
    QBT_DOWNLOADS_PATH="<your_path>/downloads"
  docker run \
    -t \
    --name qbittorrent-nox \
    --read-only \
    --rm \
    --stop-timeout 1800 \
    --tmpfs /tmp \
    -e QBT_LEGAL_NOTICE \
    -e QBT_TORRENTING_PORT \
    -e QBT_WEBUI_PORT \
    -p "$QBT_TORRENTING_PORT":"$QBT_TORRENTING_PORT"/tcp \
    -p "$QBT_TORRENTING_PORT":"$QBT_TORRENTING_PORT"/udp \
    -p "$QBT_WEBUI_PORT":"$QBT_WEBUI_PORT"/tcp \
    -v "$QBT_CONFIG_PATH":/config \
    -v "$QBT_DOWNLOADS_PATH":/downloads \
    qbittorrentofficial/qbittorrent-nox:${QBT_VERSION}
  

• If using Docker Compose:

  docker compose up
  

Tweaking the options

• The image value can be changed to ghcr.io/qbittorrent/docker-qbittorrent-nox:${QBT_VERSION} to use the GitHub mirror.

• To pass additional command-line arguments to qbittorrent-nox, append them to the end of the docker run ... command. If using Docker Compose, modify the command: array in docker-compose.yml.

• ⚠️ To ensure qBittorrent has enough time to shut down properly, you must override the container's stop timeout.
  If unspecified, the default value is only 10 seconds, which is too short and can interrupt the shutdown procedure, leading to corrupted files.
  Set --stop-timeout 1800 (or stop_grace_period: 30m when using Docker Compose).

• To change the timezone in the container, set the TZ environment variable to your preferred value.
  The default is inherited from Alpine Linux, which is most likely UTC.

• To change the User ID (UID) and Group ID (GID) of the qbittorrent-nox process, set the environment variables PUID and PGID respectively.
  The default is 1000 for both.

  • 📢 You will need to remove the --read-only flag (when using Docker) or set read_only: false (when using Docker Compose), as these settings are incompatible.
  • These environment variables have no effect when running the image in rootless mode.

• To set additional group IDs (AGID) for the qbittorrent-nox process, set the environment variable PAGID. For example: 10000,10001. This will set the process to be in two (secondary) groups, 10000 and 10001.
  By default, there are no additional groups.

  • 📢 You will need to remove the --read-only flag (when using Docker) or set read_only: false (when using Docker Compose), as these settings are incompatible.
  • This environment variable has no effect when running the image in rootless mode.

• To set the umask of the qbittorrent-nox process, set the environment variable UMASK.
  The default is inherited from Alpine Linux.

• To list the compile-time Software Bill of Materials (SBOM), run:

  docker run --entrypoint /bin/cat --rm qbittorrentofficial/qbittorrent-nox:latest /sbom.txt
  

Log in to qBittorrent-nox at: http://<your_docker_host_address>:8080

• For newer qBittorrent versions (≥ 4.6.1), qBittorrent will generate a temporary password and print it to the console (via stdout). You will need to use this password to log in. See the announcement.
  If you don't have a console attached, you can run the following to view the logs:

  docker logs qbittorrent-nox
  

• For older qBittorrent versions (< 4.6.1), the default username/password is: admin/adminadmin.

[!IMPORTANT] Don't forget to change your password after logging in!
To change it in WebUI: Tools menu -> Options... -> WebUI tab -> Authentication

4. Stopping the container

• When using Docker (not Docker Compose):

  docker stop qbittorrent-nox
  

• When using Docker Compose:

  docker compose down
  

Build the image manually

Refer to the manual_build folder.

Debugging

To attach the GNU Debugger (gdb) to the running qbittorrent-nox process, follow the steps below:

1. Before you start the container

   • Remove --read-only because additional packages are needed inside the container.
     Or disable the respective attributes in docker-compose.yml.
   • Add --cap-add=SYS_PTRACE to the docker run argument list.
     Or enable the respective attributes in docker-compose.yml.

2. Start the container

3. Drop into the container

   # find container ID
   docker ps
   # open an interactive shell in the container
   docker exec -it <container_id> /bin/sh
   

4. Install packages

   apk add \
     gdb \
     musl-dbg
   

5. Attach gdb to the running process

   # find the PID of qbittorrent-nox
   ps -a
   # attach the debugger to the process
   gdb -p <PID>