skeeto/endlessh hiện có 8.6k sao trên GitHub, viết chủ yếu bằng C. SSH tarpit that slowly sends an endless banner
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
Endlessh is an SSH tarpit that very slowly sends an endless, random
SSH banner. It keeps SSH clients locked up for hours or even days
at a time. The purpose is to put your real SSH server on another port
and then let the script kiddies get stuck in this tarpit instead of
bothering a real server.
Since the tarpit is in the banner before any cryptographic exchange
occurs, this program doesn't depend on any cryptographic libraries. It's
a simple, single-threaded, standalone C program. It uses poll() to
trap multiple clients at a time.
Usage
Usage information is printed with -h.
Usage: endlessh [-vhs] [-d MS] [-f CONFIG] [-l LEN] [-m LIMIT] [-p PORT]
-4 Bind to IPv4 only
-6 Bind to IPv6 only
-d INT Message millisecond delay [10000]
-f Set and load config file [/etc/endlessh/config]
-h Print this help message and exit
-l INT Maximum banner line length (3-255) [32]
-m INT Maximum number of clients [4096]
-p INT Listening port [2222]
-s Print diagnostics to syslog instead of standard output
-v Print diagnostics (repeatable)
Argument order matters. The configuration file is loaded when the -f
argument is processed, so only the options that follow will override the
configuration file.
By default no log messages are produced. The first -v enables basic
logging and a second -v enables debugging logging (noisy). All log
messages are sent to standard output by default. -s causes them to be
sent to syslog.
endlessh -v >endlessh.log 2>endlessh.err
A SIGTERM signal will gracefully shut down the daemon, allowing it to
write a complete, consistent log.
A SIGHUP signal requests a reload of the configuration file (-f).
A SIGUSR1 signal will print connections stats to the log.
Sample Configuration File
The configuration file has similar syntax to OpenSSH.
# The port on which to listen for new SSH connections.
Port 2222
# The endless banner is sent one line at a time. This is the delay
# in milliseconds between individual lines.
Delay 10000
# The length of each line is randomized. This controls the maximum
# length of each line. Shorter lines may keep clients on for longer if
# they give up after a certain number of bytes.
MaxLineLength 32
# Maximum number of connections to accept at a time. Connections beyond
# this are not immediately rejected, but will wait in the queue.
MaxClients 4096
# Set the detail level for the log.
# 0 = Quiet
# 1 = Standard, useful log messages
# 2 = Very noisy debugging information
LogLevel 0
# Set the family of the listening socket
# 0 = Use IPv4 Mapped IPv6 (Both v4 and v6, default)
# 4 = Use IPv4 only
# 6 = Use IPv6 only
BindFamily 0
Build issues
Some more esoteric systems require extra configuration when building.
RHEL 6 / CentOS 6
This system uses a version of glibc older than 2.17 (December 2012), and
clock_gettime(2) is still in librt. For these systems you will need to
link against librt:
make LDLIBS=-lrt
Solaris / illumos
These systems don't include all the necessary functionality in libc and
the linker requires some extra libraries:
make CC=gcc LDLIBS='-lnsl -lrt -lsocket'
If you're not using GCC or Clang, also override CFLAGS and LDFLAGS
to remove GCC-specific options. For example, on Solaris:
make CFLAGS=-fast LDFLAGS= LDLIBS='-lnsl -lrt -lsocket'
The feature test macros on these systems isn't reliable, so you may also
need to use -D__EXTENSIONS__ in CFLAGS.
OpenBSD
The man page needs to go into a different path for OpenBSD's man command:
Trang TopGit này là một snapshot — tab "Readme" hiển thị nguyên văn README của repo (đã bỏ link, giữ ảnh). Repo GitHub ở github.com/skeeto/endlessh là nguồn chính thức.
skeeto/endlessh có phải mã nguồn mở không?
Có — skeeto/endlessh phát hành theo license Unlicense, nghĩa là mã nguồn mở để đọc, fork và (tùy license) tái sử dụng. Mã: github.com/skeeto/endlessh.
skeeto/endlessh là gì?
skeeto/endlessh (skeeto/endlessh) là dự án C trên GitHub. Theo mô tả gốc: SSH tarpit that slowly sends an endless banner
Đọc đầy đủ README ở tab phía trên.
Vẫn đang phân vân về endlessh?
Một cú bấm sẽ gửi câu hỏi kèm trang này cho AI — xem AI nói gì về endlessh.