Được TopGit lập chỉ mục từ metadata GitHub: smacke/ffsubsync có 7.9k sao, viết chủ yếu bằng Python. Automagically synchronize subtitles with video.
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
Language-agnostic automatic synchronization of subtitles with video, so that
subtitles are aligned to the correct starting point within the video.
Turn this:
Into this:
Try it in your browser (no install)
You can now sync subtitles entirely in your browser — no Python, no ffmpeg, and
nothing to install. Your files never leave your machine (nothing is uploaded):
👉 https://smacke.github.io/ffsubsync
The browser version syncs against either a correctly-synced reference subtitle or a
video / audio file — audio is decoded in-browser with ffmpeg.wasm (large files are read
lazily, never uploaded). For bulk or scripted use, install the command-line tool below.
Helping Development
Please consider supporting Ukraine
rather than donating directly to this project. That said, at the request of
some, you can now help cover my coffee expenses using the Github Sponsors
button at the top, or using the below Paypal Donate button:
Install
First, make sure ffmpeg is installed. On MacOS, this looks like:
brew install ffmpeg
(Windows users: make sure ffmpeg is on your path and can be referenced
from the command line!)
Next, grab the package (compatible with Python >= 3.6):
pip install ffsubsync
If you want to live dangerously, you can grab the latest version as follows:
There may be occasions where you have a correctly synchronized srt file in a
language you are unfamiliar with, as well as an unsynchronized srt file in your
native language. In this case, you can use the correctly synchronized srt file
directly as a reference for synchronization, instead of using the video as the
reference:
ffsubsync uses the file extension to decide whether to perform voice activity
detection on the audio or to directly extract speech from an srt file.
If you omit -i, ffsubsync auto-detects input subtitles sitting next to the
reference that share its name, so you can simply run:
ffs video.mp4
This picks up files like video.srt and video.en.srt from the reference's
directory and writes the synced result for each to a <name>.synced.srt
alongside it (e.g. video.synced.srt), leaving the originals untouched.
Previously-synced *.synced.srt outputs are skipped, so re-running is safe. Add
--overwrite-input to overwrite the detected file(s) in place instead. Auto-
detection is skipped when subtitles are piped in on stdin.
The reference can also be a remote URL instead of a local file. Anything ffmpeg
can read directly works as a video / audio reference, and remote subtitle files
work as a reference too:
Supported protocols are http(s)://, rtmp://, rtsp://, and ftp://.
Processing streams the reference over the network, so it depends on connection
stability; for large or flaky sources, downloading first is more reliable.
Sibling-subtitle auto-detection (the no--i form above) is local-only and is
skipped for remote references.
To speed up long references, --max-duration-seconds N processes only the
first N seconds (measured from --start-seconds). This is especially helpful
for remote references, since ffmpeg stops reading—and therefore downloading—once
that duration is reached:
On flaky connections, --extract-audio-first can be more reliable: instead of
holding a network stream open throughout speech detection, it first copies the
remote audio track to a local temp file (no re-encode) and runs detection on
that. It is ignored for local references and composes with
--max-duration-seconds:
For long references where --max-duration-seconds would miss desync that only
shows up later, --multi-segment-sync instead samples several short segments
spread across the whole reference and runs speech detection on just those:
Only the sampled audio is extracted (and, for remote references, downloaded),
but because each segment keeps its true position on the timeline, the usual
framerate-ratio and offset search is unchanged—so a framerate mismatch is still
detected and corrected. Tune it with --segment-count N (default 8),
--skip-intro-outro (skip the first 30s / last 60s, which often lack dialogue),
and --parallel-workers N (overlap segment downloads, default 4). It applies to
video / audio references only.
Docker
Prebuilt images are published to the GitHub Container Registry. Pull the
latest release with:
docker pull ghcr.io/smacke/ffsubsync:latest
Run it by mounting the directory with your video and subtitles into /video:
ffsubsync can be driven programmatically via ffsubsync.run, which accepts an
argparse.Namespace (build one with make_parser). To surface progress in your
own UI, pass a progress_handler callback; it is invoked repeatedly while the
reference's audio is being decoded with a ProgressInfo describing how far along
the extraction is:
import ffsubsync
from ffsubsync.ffsubsync import make_parser
def on_progress(info: ffsubsync.ProgressInfo) -> None:
# info.processed_seconds / info.total_seconds (total may be None);
# info.fraction is a 0.0-1.0 ratio (None if the total is unknown).
if info.fraction is not None:
print(f"{info.fraction:.0%}")
args = make_parser().parse_args(["ref.mkv", "-i", "in.srt", "-o", "out.srt"])
result = ffsubsync.run(args, progress_handler=on_progress)
The handler is called only for the video / audio reference path (the dominant
cost of a sync). Exceptions it raises are logged and swallowed, so a buggy
handler can never abort syncing.
Character Encoding
Subtitle files in the wild come in a mess of legacy encodings (Windows-1251 for
Cyrillic, GBK / Big5 for Chinese, Latin-1, Shift-JIS, UTF-16 with a BOM, ...).
Robustly handling these is something ffsubsync does well compared to other
subtitle sync tools, and it happens automatically: --encoding defaults to
infer, which reads the input as raw bytes and auto-detects the encoding. Under
the hood it tries up to three detectors in order and takes the first that
answers — cchardet, then
charset_normalizer, then
chardet — and decodes with
errors="replace" so a slightly-off guess degrades gracefully instead of
crashing. BOMs are handled for free (the raw bytes are what the detector sees).
If auto-detection guesses wrong, force it with e.g. --encoding windows-1251.
Output is written as UTF-8 by default; pass --output-encoding same to preserve
the input's encoding instead, or name any codec explicitly. When the reference is
itself a subtitle file, --reference-encoding controls it (also infer by
default).
One cross-version caveat worth knowing: the fastest / often most accurate
detector, cchardet, is supplied by the maintained
faust-cchardet fork (which replaced
the unmaintained original cchardet and installs under the module name
cchardet). It is only declared as a dependency for Python < 3.13
(faust-cchardet;python_version<'3.13' in requirements.txt). On Python
3.13+ it isn't installed, so import cchardet fails quietly and detection falls
back to the pure-Python charset_normalizer and chardet. This is usually
indistinguishable in practice, but on an ambiguous legacy encoding the guess can
differ — in which case just pass --encoding explicitly, or run under Python 3.12
or earlier where the C detector is available. See the
encoding docs for the
full story.
Sync Issues
If the sync fails, the following recourses are available:
Try to sync assuming identical video / subtitle framerates by passing
--no-fix-framerate;
Try passing --gss to use golden-section search
to find the optimal ratio between video and subtitle framerates (by default,
only a few common ratios are evaluated);
Try a value of --max-offset-seconds greater than the default of 60, in the
event that the subtitles are out of sync by more than 60 seconds (empirically
unlikely in practice, but possible).
If the subtitles start in sync but drift partway through — a commercial break
was cut out, a scene was inserted or removed (a "director's cut"), or two discs
were concatenated into one file — no single global offset can fix both sides.
Try --split-penalty, which enables an
alass-style piecewise alignment that lets the
offset change across the timeline, introducing a break only where it genuinely
improves alignment. Pass the flag with no value for a reasonable default, or a
number (seconds of overlap; ~4–20 are typical) to set the cost of each split —
lower splits more eagerly, higher stays closer to a single offset. See the
advanced options docs
for the full story.
Try --vad=auditok since auditok can
sometimes work better in the case of low-quality audio than WebRTC's VAD.
Auditok does not specifically detect voice, but instead detects all audio;
this property can yield suboptimal syncing behavior when a proper VAD can
work well, but can be effective in some cases.
Try --vad=fused, which combines WebRTC with the neural
silero VAD and can be more robust on
noisy audio. The strategy can be tuned: --vad=fused:intersection
(conservative -- speech only where both agree), --vad=fused:union
(aggressive -- speech where either fires), or --vad=fused:weighted (the
default). These options require the optional silero dependency, which itself
requires PyTorch; install both with pip install ffsubsync[torch] (or just
pip install torch). torch is not installed with ffsubsync by default.
For a video with no subtitles to borrow from, try transcribing the audio with
whisper.cpp and using the transcript
as the reference: --whisper-weights ~/whisper.cpp/models/ggml-base.en.bin.
This needs an ffmpeg (>= 8.0) built with --enable-whisper. ffsubsync
expands ~ in the path, infers the language (English for *.en.bin models,
else auto-detect; override with --language), and warns if the video already
has embedded subtitles. Extra whisper filter options can be passed via
--whisper-args (e.g. --whisper-args queue=12).
When syncing in bulk, a bad sync can be worse than none. Passing
--skip-sync-on-low-quality leaves the subtitles unmodified when the alignment
looks untrustworthy—an anti-correlated score (--min-score, default 0.0) or an
implausibly large offset (--quality-max-offset-seconds, default 30). There is
also a --max-framerate-deviation check (default 0.1, which permits every
framerate correction ffsubsync makes); tighten it only when you know the
framerate should not change.
If the sync still fails, consider trying one of the following similar tools:
sc0ty/subsync: does speech-to-text and looks for matching word morphemes
kaegi/alass: rust-based subtitle synchronizer with a fancy dynamic programming algorithm
tympanix/subsync: neural net based approach that optimizes directly for alignment when performing speech detection
oseiskar/autosubsync: performs speech detection with bespoke spectrogram + logistic regression
pums974/srtsync: similar approach to ffsubsync (WebRTC's VAD + FFT to maximize signal cross correlation)
Speed
ffsubsync usually finishes in 20 to 30 seconds, depending on the length of
the video. The most expensive step is actually extraction of raw audio. If you
already have a correctly synchronized "reference" srt file (in which case audio
extraction can be skipped), ffsubsync typically runs in less than a second.
How It Works
The synchronization algorithm operates in 3 steps:
Discretize both the video file's audio stream and the subtitles into 10ms
windows.
For each 10ms window, determine whether that window contains speech. This
is trivial to do for subtitles (we just determine whether any subtitle is
"on" during each time window); for the audio stream, use an off-the-shelf
voice activity detector (VAD) like
the one built into webrtc.
Now we have two binary strings: one for the subtitles, and one for the
video. Try to align these strings by matching 0's with 0's and 1's with
1's. We score these alignments as (# video 1's matched w/ subtitle 1's) - (#
video 1's matched with subtitle 0's).
The best-scoring alignment from step 3 determines how to offset the subtitles
in time so that they are properly synced with the video. Because the binary
strings are fairly long (millions of digits for video longer than an hour), the
naive O(n^2) strategy for scoring all alignments is unacceptable. Instead, we
use the fact that "scoring all alignments" is a convolution operation and can
be implemented with the Fast Fourier Transform (FFT), bringing the complexity
down to O(n log n).
Limitations
In most cases, inconsistencies between video and subtitles occur when starting
or ending segments present in video are not present in subtitles, or vice versa.
This can occur, for example, when a TV episode recap in the subtitles was pruned
from video. FFsubsync typically works well in these cases, and in my experience
this covers >95% of use cases. Breaks and splits outside the beginning and
ending segments — a commercial break cut out of the middle, an inserted or removed
scene, or two discs concatenated into one file — are trickier, since no single
global offset can fix both sides. The experimental --split-penalty mode handles
many of these; see Sync Issues above.
Future Work
Besides general stability and usability improvements, one line of work aims to
harden the alass-style --split-penalty mode
that handles splits / breaks in the middle of video not present in subtitles (or
vice versa). It works well in many cases today but is still considered
experimental. See #10 for more
details.
History
The implementation for this project was started during HackIllinois 2019, for
which it received an Honorable Mention (ranked in the top 5 projects,
excluding projects that won company-specific prizes).
Credits
This project would not be possible without the following libraries:
ffmpeg and the ffmpeg-python wrapper, for extracting raw audio from video
VAD from webrtc and the py-webrtcvad wrapper, for speech detection
srt for operating on SRT files
numpy and, indirectly, FFTPACK, which powers the FFT-based algorithm for fast scoring of alignments between subtitles (or subtitles and video)
Other excellent Python libraries like argparse, rich, and tqdm, not related to the core functionality, but which enable much better experiences for developers and users.
smacke/ffsubsync có 7.9k sao GitHub — tải lại trang để xem số mới nhất, hoặc xem trực tiếp github.com/smacke/ffsubsync. TopGit phản chiếu số sao của GitHub nhưng không cam kết đến từng phút.
Commit gần nhất trên smacke/ffsubsync là 3 tháng trước (theo timestamp GitHub). Repo có 328 fork — một chỉ báo về mức độ quan tâm của cộng đồng.
smacke/ffsubsync là gì?
smacke/ffsubsync (smacke/ffsubsync) là dự án Python trên GitHub. Theo mô tả gốc: Automagically synchronize subtitles with video.
smacke/ffsubsync so với các dự án Image Tools khác thế nào?
smacke/ffsubsync được TopGit xếp vào nhóm Image Tools, với 7.9k sao GitHub và viết bằng Python. Xem trang chủ đề Image Tools trên TopGit để so sánh với các dự án tương tự theo số sao và mức độ hoạt động.
smacke/ffsubsync viết bằng ngôn ngữ gì?
smacke/ffsubsync chủ yếu viết bằng Python. Trường "language" của GitHub dựa trên phần lớn byte ở nhánh mặc định.
Vì sao smacke/ffsubsync được xếp vào nhóm Image Tools?
TopGit xếp smacke/ffsubsync vào nhóm Image Tools dựa trên GitHub topics và mô tả của repo (gắn thẻ: "alignment", "audio", "caption"). Việc phân loại dựa trên metadata thật của repo, không phải đoán theo cảm tính biên tập.
Đọc đầy đủ README ở tab phía trên.
ffsubsync có đáng để bạn bỏ thời gian?
ChatGPT, Claude và Perplexity đều đọc được trang này. Hỏi thử xem họ nghĩ gì về ffsubsync.