sstephenson/bats — 7.1k★ trên GitHub (Shell). Bash Automated Testing System
Tóm tắt dựng từ metadata GitHub của chính dự án — chưa có bài review TopGit. Trang sẽ tự động cập nhật khi bài review đầy đủ được xuất bản.
VÌ SAO CHƯA CÓ REVIEW
TopGit viết bài đầy đủ cho repo có nhiều sao nhất và được yêu cầu nhiều nhất. Trang này là snapshot trong thời gian chờ — xem README gốc ở tab READ ME.
Bats is most useful when testing software written in Bash, but you can
use it to test any UNIX program.
Test cases consist of standard shell commands. Bats makes use of
Bash's errexit (set -e) option when running test cases. If every
command in the test case exits with a 0 status code (success), the
test passes. In this way, each line is an assertion of truth.
Running tests
To run your tests, invoke the bats interpreter with a path to a test
file. The file's test cases are run sequentially and in isolation. If
all the test cases pass, bats exits with a 0 status code. If there
are any failures, bats exits with a 1 status code.
When you run Bats from a terminal, you'll see output as each test is
performed, with a check-mark next to the test's name if it passes or
an "X" if it fails.
$ bats addition.bats
✓ addition using bc
✓ addition using dc
2 tests, 0 failures
If Bats is not connected to a terminal—in other words, if you
run it from a continuous integration system, or redirect its output to
a file—the results are displayed in human-readable, machine-parsable
TAP format.
You can force TAP output from a terminal by invoking Bats with the
--tap option.
$ bats --tap addition.bats
1..2
ok 1 addition using bc
ok 2 addition using dc
Test suites
You can invoke the bats interpreter with multiple test file
arguments, or with a path to a directory containing multiple .bats
files. Bats will run each test file individually and aggregate the
results. If any test case fails, bats exits with a 1 status code.
Writing tests
Each Bats test file is evaluated n+1 times, where n is the number of
test cases in the file. The first run counts the number of test cases,
then iterates over the test cases and executes each one in its own
process.
For more details about how Bats evaluates test files, see
Bats Evaluation Process
on the wiki.
run: Test other commands
Many Bats tests need to run a command and then make assertions about
its exit status and output. Bats includes a run helper that invokes
its arguments as a command, saves the exit status and output into
special global variables, and then returns with a 0 status code so
you can continue to make assertions in your test case.
For example, let's say you're testing that the foo command, when
passed a nonexistent filename, exits with a 1 status code and prints
an error message.
@test "invoking foo with a nonexistent file prints an error" {
run foo nonexistent_filename
[ "$status" -eq 1 ]
[ "$output" = "foo: no such file 'nonexistent_filename'" ]
}
The $status variable contains the status code of the command, and
the $output variable contains the combined contents of the command's
standard output and standard error streams.
A third special variable, the $lines array, is available for easily
accessing individual lines of output. For example, if you want to test
that invoking foo without any arguments prints usage information on
the first line:
@test "invoking foo without arguments prints usage" {
run foo
[ "$status" -eq 1 ]
[ "${lines[0]}" = "usage: foo <filename>" ]
}
load: Share common code
You may want to share common code across multiple test files. Bats
includes a convenient load command for sourcing a Bash source file
relative to the location of the current test file. For example, if you
have a Bats test in test/foo.bats, the command
load test_helper
will source the script test/test_helper.bash in your test file. This
can be useful for sharing functions to set up your environment or load
fixtures.
skip: Easily skip tests
Tests can be skipped by using the skip command at the point in a
test you wish to skip.
@test "A test I don't want to execute for now" {
skip
run foo
[ "$status" -eq 0 ]
}
Optionally, you may include a reason for skipping:
@test "A test I don't want to execute for now" {
skip "This command will return zero soon, but not now"
run foo
[ "$status" -eq 0 ]
}
Or you can skip conditionally:
@test "A test which should run" {
if [ foo != bar ]; then
skip "foo isn't bar"
fi
run foo
[ "$status" -eq 0 ]
}
setup and teardown: Pre- and post-test hooks
You can define special setup and teardown functions, which run
before and after each test case, respectively. Use these to load
fixtures, set up your environment, and clean up when you're done.
Code outside of test cases
You can include code in your test file outside of @test functions.
For example, this may be useful if you want to check for dependencies
and fail immediately if they're not present. However, any output that
you print in code outside of @test, setup or teardown functions
must be redirected to stderr (>&2). Otherwise, the output may
cause Bats to fail by polluting the TAP stream on stdout.
Special variables
There are several global variables you can use to introspect on Bats
tests:
$BATS_TEST_FILENAME is the fully expanded path to the Bats test
file.
$BATS_TEST_DIRNAME is the directory in which the Bats test file is
located.
$BATS_TEST_NAMES is an array of function names for each test case.
$BATS_TEST_NAME is the name of the function containing the current
test case.
$BATS_TEST_DESCRIPTION is the description of the current test
case.
$BATS_TEST_NUMBER is the (1-based) index of the current test case
in the test file.
$BATS_TMPDIR is the location to a directory that may be used to
store temporary files.
Installing Bats from source
Check out a copy of the Bats repository. Then, either add the Bats
bin directory to your $PATH, or run the provided install.sh
command with the location to the prefix in which you want to install
Bats. For example, to install Bats into /usr/local,
$ git clone https://github.com/sstephenson/bats.git
$ cd bats
$ ./install.sh /usr/local
Note that you may need to run install.sh with sudo if you do not
have permission to write to the installation prefix.
Support
The Bats source code repository is hosted on
GitHub. There you can file bugs
on the issue tracker or submit tested pull requests for review.
For real-world examples from open-source projects using Bats, see
Projects Using Bats
on the wiki.
To learn how to set up your editor for Bats syntax highlighting, see
Syntax Highlighting
on the wiki.
Version history
0.4.0 (August 13, 2014)
Improved the display of failing test cases. Bats now shows the
source code of failing test lines, along with full stack traces
including function names, filenames, and line numbers.
Improved the display of the pretty-printed test summary line to
include the number of skipped tests, if any.
Improved the speed of the preprocessor, dramatically shortening test
and suite startup times.
Added support for absolute pathnames to the load helper.
Added support for single-line @test definitions.
Added bats(1) and bats(7) manual pages.
Modified the bats command to default to TAP output when the $CI
variable is set, to better support environments such as Travis CI.
0.3.1 (October 28, 2013)
Fixed an incompatibility with the pretty formatter in certain
environments such as tmux.
Fixed a bug where the pretty formatter would crash if the first line
of a test file's output was invalid TAP.
0.3.0 (October 21, 2013)
Improved formatting for tests run from a terminal. Failing tests
are now colored in red, and the total number of failing tests is
displayed at the end of the test run. When Bats is not connected to
a terminal (e.g. in CI runs), or when invoked with the --tap flag,
output is displayed in standard TAP format.
Added the ability to skip tests using the skip command.
Added a message to failing test case output indicating the file and
line number of the statement that caused the test to fail.
Added "ad-hoc" test suite support. You can now invoke bats with
multiple filename or directory arguments to run all the specified
tests in aggregate.
Added support for test files with Windows line endings.
Fixed regular expression warnings from certain versions of Bash.
Fixed a bug running tests containing lines that begin with -e.
0.2.0 (November 16, 2012)
Added test suite support. The bats command accepts a directory
name containing multiple test files to be run in aggregate.
Added the ability to count the number of test cases in a file or
suite by passing the -c flag to bats.
Preprocessed sources are cached between test case runs in the same
file for better performance.
Trang TopGit này là một snapshot — tab "Readme" hiển thị nguyên văn README của repo (đã bỏ link, giữ ảnh). Repo GitHub ở github.com/sstephenson/bats là nguồn chính thức.
sstephenson/bats có bao nhiêu sao?
sstephenson/bats có 7.1k sao GitHub — tải lại trang để xem số mới nhất, hoặc xem trực tiếp github.com/sstephenson/bats. TopGit phản chiếu số sao của GitHub nhưng không cam kết đến từng phút.
sstephenson/bats có phải mã nguồn mở không?
Có — sstephenson/bats phát hành theo license MIT, nghĩa là mã nguồn mở để đọc, fork và (tùy license) tái sử dụng. Mã: github.com/sstephenson/bats.
sstephenson/bats còn đang phát triển không?
Commit gần nhất trên sstephenson/bats là 7.2 năm trước (theo timestamp GitHub). Repo có 508 fork — một chỉ báo về mức độ quan tâm của cộng đồng.
sstephenson/bats dùng license gì?
sstephenson/bats phát hành theo license MIT. Nên mở file LICENSE trên GitHub để xác nhận — license metadata đôi khi lệch với thực tế dự án.
sstephenson/bats là gì?
sstephenson/bats (sstephenson/bats) là dự án Shell trên GitHub. Theo mô tả gốc: Bash Automated Testing System
sstephenson/bats viết bằng ngôn ngữ gì?
sstephenson/bats chủ yếu viết bằng Shell. Trường "language" của GitHub dựa trên phần lớn byte ở nhánh mặc định.
Đọc đầy đủ README ở tab phía trên.
bats có đáng để bạn bỏ thời gian?
ChatGPT, Claude và Perplexity đều đọc được trang này. Hỏi thử xem họ nghĩ gì về bats.