Free Lossless Audio Codec (FLAC)
FLAC is open source software that can reduce the amount of storage space
needed to store digital audio signals without needing to remove
information in doing so.
The files read and produced by this software are called FLAC files. As
these files (which follow the FLAC format)
can be read from and written to by other software as well, this software
is often referred to as the FLAC reference implementation.
FLAC has been developed by volunteers. If you want to help out, see
CONTRIBUTING.md for more information.
Components
FLAC is comprised of
- libFLAC, a library which implements reference encoders and
decoders for native FLAC and Ogg FLAC, and a metadata interface
- libFLAC++, a C++ object wrapper library around libFLAC
flac, a command-line program for encoding and decoding filesmetaflac, a command-line program for viewing and editing FLAC
metadata- user and API documentation
The libraries (libFLAC, libFLAC++) are licensed under Xiph.org's
BSD-like license (see COPYING.Xiph). All other programs and plugins are
licensed under the GNU General Public License (see COPYING.GPL). The
documentation is licensed under the GNU Free Documentation License
(see COPYING.FDL).
Documentation
For documentation of the flac and metaflac command line tools, see
the directory man, which contains the files flac.md and metaflac.md
The API documentation is in html and is generated by Doxygen. It can be
found in the directory doc/html/api. It is included in a release tarball
and must be build with Doxygen when the source is taken directly from
git.
The directory examples contains example source code on using libFLAC and
libFLAC++.
Documentation concerning the FLAC format itself (which can be used to
create software reading and writing FLAC software independent from
libFLAC) was included in previous releases, but can now be found on
https://datatracker.ietf.org/doc/draft-ietf-cellar-flac/ Additionally
a set of files for conformance testing called the FLAC decoder testbench
can be found at https://github.com/ietf-wg-cellar/flac-test-files
If you have questions about FLAC that this document does not answer,
please submit them at the following tracker so this document can be
improved:
https://github.com/xiph/flac/issues
Building FLAC
All components of the FLAC project can be build with a variety of
compilers (including GCC, Clang, Visual Studio, Intel C++ Compiler) on
many architectures (inluding x86, x86_64, ARMv7, ARMv8 and PowerPC)
for many different operating systems.
To do this, FLAC provides two build systems: one using GNU's autotools
and one with CMake. Both differ slighly in configuration options, but
should be considered equivalent for most use cases.
FLAC used to provide files specifically for building with Visual Studio,
but these have been removed in favor of using CMake.
Building with CMake
CMake is a cross-platform build system. FLAC can be built on Windows,
Linux, Mac OS X using CMake.
You can use either CMake's CLI or GUI. We recommend you to have a
separate build folder outside the repository in order to not spoil it
with generated files. It is possible however to do a so-called in-tree
build, in that case /path/to/flac-build in the following examples is
equal to /path/to/flac-source.
CMake CLI
Go to your build folder and run something like this:
/path/to/flac-build$ cmake /path/to/flac-source
or e.g. in Windows shell
C:\path\to\flac-build> cmake \path\to\flac-source
(provided that cmake is in your %PATH% variable)
That will generate build scripts for the default build system (e.g.
Makefiles for UNIX). After that you start build with a command like
this:
/path/to/flac-build$ make
And afterwards you can run tests or install the built libraries and
headers
/path/to/flac-build$ make test
/path/to/flac-build$ make install
If you want use a build system other than default add -G flag to cmake,
e.g.:
/path/to/flac-build$ cmake /path/to/flac-source -GNinja
/path/to/flac-build$ ninja
or:
/path/to/flac-build$ cmake /path/to/flac-source -GXcode
Use cmake --help to see the list of available generators.
By default CMake will search for OGG. If CMake fails to find it you can
help CMake by specifying the exact path:
/path/to/flac-build$ cmake /path/to/flac-source -DOGG_ROOT=/path/to/ogg
If you would like CMake to build OGG alongside FLAC, you can place the
ogg sources directly in the flac source directory as a subdirectory with
the name ogg, for example:
/path/to/flac-source/ogg
If you don't want to build flac with OGG support you can tell CMake not
to look for OGG:
/path/to/flac-build$ cmake /path/to/flac-source -DWITH_OGG=OFF
Other FLAC's options (e.g. building C++ lib or docs) can also be put to
cmake through -D flag. If you want to know what options are available,
use -LH:
/path/to/flac-build$ cmake /path/to/flac-source -LH
CMake GUI (for Visual Studio)
It is likely that you would prefer to use the CMake GUI if you use
Visual Studio to build FLAC. It's in essence the same process as
building using CLI.
Open cmake-gui. In the window select a source directory (the
repository's root), a build directory (some other directory outside the
repository). Then press button "Configure". CMake will ask you which
build system you prefer. Choose that version of Visual Studio which you
have on your system, choose whether you want to build for Win32 or x64.
Press OK.
After CMake finishes you can change the configuration to your liking and
if you change anything, run Configure again. With the "Generate" button,
CMake creates Visual Studio files, which can be opened from Visual
Studio. With the button "Open Project" CMake will launch Visual Studio
and open the generated solution. You can use the project files as usual
but remember that they were generated by CMake. That means that your
changes (e.g. some additional compile flags) will be lost when you run
CMake next time.
CMake searches by default for OGG on your system and returns an error
if it cannot find it. If you want to build OGG alongside FLAC, you can
download the OGG sources and extract them in a subdirectory of the FLAC
source directory with the name ogg (i.e. /path/to/flac-source/ogg)
before running CMake. If you don't want to build FLAC with OGG support,
untick the box following WITH_OGG flag in the list of variables in
cmake-gui window and run "Configure" again.
If CMake fails to find MSVC compiler then running cmake-gui from MS
Developer comand prompt should help.
Building with GNU autotools
FLAC uses autoconf and libtool for configuring and building. To
configure a build, open a commmand line/terminal and run ./configure
You can provide options to this command, which are listed by running
./configure --help.
In case the configure script is not present (for example when building
from git and not from a release tarball), it can be generated by running
./autogen.sh. This may require a libtool development package though.
After configuration, build with make, verify the build with
make check and install with make install. Installation might require
administrator priviledged, i.e. sudo make install.
The 'make check' step is optional; omit it to skip all the tests, which
can take about an hour to complete. Even though it will stop with an
explicit message on any failure, it does print out a lot of stuff so you
might want to capture the output to a file if you're having a problem.
Also, don't run 'make check' as root because it confuses some of the
tests.
Summarizing:
./configure
make && make check
sudo make install
Note to embedded developers
libFLAC has grown larger over time as more functionality has been
included, but much of it may be unnecessary for a particular embedded
implementation. Unused parts may be pruned by some simple editing of
configure.ac and src/libFLAC/Makefile.am; the following dependency
graph shows which modules may be pruned without breaking things
further down:
metadata.h
stream_decoder.h
format.h
stream_encoder.h
stream_decoder.h
format.h
stream_decoder.h
format.h
In other words, for pure decoding applications, both the stream encoder
and metadata editing interfaces can be safely removed. Note that this
is specific to building the libraries for embedded use. The command line
tools do not provide such compartmentalization, and require a complete
libFLAC build to function.
There is a section dedicated to embedded use in the libFLAC API
HTML documentation (see doc/html/api/index.html).
Also, there are several places in the libFLAC code with comments marked
with "OPT:" where a #define can be changed to enable code that might be
faster on a specific platform. Experimenting with these can yield
faster binaries.
