orhun/halp

A CLI tool to get help with CLI tools 🐙

halp aims to help find the correct arguments for command-line tools by checking the predefined list of commonly used options/flags. Additionally, it provides a prompt for quick access to the manual page or cheat sheet of the given command.

If you deal with command-line tools often, it might take some time to figure out how to get help or check the version of a particular command (especially when shell completions are not available). In that case, you might try the most-known flags such as -h and -v but unfortunately not all the command-line tools follow these conventions (either due to conflicts with other flags or they just use another form). Instead of brute-forcing manually into getting help, you can run halp <command> and it will check the following arguments for you:

• for help: --help, -h, help, -H
• for version info: --version, -v, version, -V

If one of these arguments succeeds (with exit code 0), it prints the output and exits. This way, you can get informed about the version and help in one single command. You can also customize this list with a configuration file or provide a list of arguments via command-line arguments.

On the other hand, if you really need help, you can use the plz subcommand which will prompt a selection for:

1. show the man page (runs man(1))
2. show the cheat sheet (via cheat.sh)

Example

Have you ever experienced this:

$ cli_tool -v
unknown flag -v

$ cli_tool -V
unknown flag -V

$ cli_tool -h
unknown flag -h

$ asdjw1jwhdajh1idojad # frustration
bash: asdjw1jwhdajh1idojad: command not found

$ cli_tool --help # f*cking finally!
Some CLI Tool Version 1.42.69
Usage:
  cli_tool <flags> <args> [--parameter1 value1 --parameter2 value2 ...]

Whereas with halp:

$ halp cli_tool

(°ロ°)  checking 'cli_tool -v'
(×﹏×)      fail '-v' argument not found.
(°ロ°)  checking 'cli_tool -V'
(×﹏×)      fail '-V' argument not found.
(°ロ°)  checking 'cli_tool -h'
(×﹏×)      fail '-h' argument not found.
(°ロ°)  checking 'cli_tool --help'
\(^ヮ^)/ success '--help' argument found!

Some CLI Tool Version 1.42.69
Usage:
  cli_tool <flags> <args> [--parameter1 value1 --parameter2 value2 ...]

Installation

Cargo

halp can be installed from crates.io:

cargo install halp

The minimum supported Rust version is 1.74.1.

Arch Linux

halp can be installed from the extra repository using pacman:

pacman -S halp

Or you can install the available AUR packages using an AUR helper. For example,

paru -S halp-git

Alternatively, you can clone the AUR package and then build it with makepkg. For example,

git clone https://aur.archlinux.org/halp-git.git && cd halp-git && makepkg -si

Docker

Images

Docker builds are automated and images are available in the following registries:

• Docker Hub
• GitHub Container Registry

Usage

The following commands can be used to get help for a binary inside the container:

docker run --rm -it "orhunp/halp:${TAG:-latest}" whoami
docker run --rm -it "orhunp/halp:${TAG:-latest}" plz whoami

Or you can provide a custom binary as follows (please note that you might get shared library errors):

docker run -v "bin:/app/bin:rw" --rm -it "orhunp/halp:${TAG:-latest}" -v ./bin

Building

Custom Docker images can be built from the Dockerfile:

docker build -t halp .

Binary releases

See the available binaries for different targets from the releases page. They are automated via Continuous Deployment workflow

Release tarballs are signed with the following PGP key: 0xFB41AE0358378256

Build from source

1. Clone the repository.

git clone https://github.com/orhun/halp && cd halp/

2. Build.

CARGO_TARGET_DIR=target cargo build --release

Binary will be located at target/release/halp.

Usage

halp [OPTIONS] <CMD>

Options:
      --check <ARG>    Sets the argument to check
      --no-version     Disable checking the version information
      --no-help        Disable checking the help information
  -c, --config <PATH>  Sets the configuration file [env: HALP_CONFIG=]
  -t, --timeout <S>    Sets the timeout for the command [default: 5]
  -v, --verbose        Enables verbose logging
  -h, --help           Print help
  -V, --version        Print version

plz

halp [OPTIONS] plz <CMD>

Options:
  -m, --man-cmd <MAN_CMD>   Sets the manual page command to run
      --cheat-sh-url <URL>  Use a custom URL for cheat.sh [env: CHEAT_SH_URL=]
  -p, --pager <PAGER>       Sets the pager to use
      --no-pager            Disables the pager
      --insecure            Disables TLS certificate verification for HTTP requests
  -h, --help                Print help

Examples

Check help and version (default)

halp whoami

Check a custom argument

halp --check "\--silent" zps

(You can escape - with using \-.)

You can also provide multiple arguments as follows:

halp --check "help" --check "test" menyoki

Disable defaults

halp --no-version sha512sum

halp --no-help sha512sum

Verbose logging

halp --verbose git-cliff

This will result in stderr/stdout being printed if there was an error. For example:

(°ロ°)  checking 'git-cliff -v'
(×﹏×)      fail '-v' argument not found.
(o_O)      debug
stdout:
 WARN  git_cliff > "cliff.toml" is not found, using the default configuration.
 ERROR git_cliff > Git error: `could not find repository from '.'; class=Repository (6); code=NotFound (-3)`

Get additional help (via plz)

halp plz vim

Custom pager

halp plz --pager bat vim

To disable the pager:

halp plz --no-pager bat vim

Custom cheat.sh host URL

halp plz --cheat-sh-url https://cht.sh vim

Skipping TLS certificate verification

Behind a TLS-inspecting proxy the providers are reached through a certificate that is not in the system trust store, which fails with invalid peer certificate: UnknownIssuer. To skip verification:

halp plz --insecure vim

This disables certificate checking for the request, so only use it on networks you trust.

Configuration

halp can be configured with a configuration file that uses the TOML format. It can be specified via --config or HALP_CONFIG environment variable. It can also be placed in one of the following global locations:

• <config_dir> / halp.toml
• <config_dir> / halp/halp.toml
• <config_dir> / halp/config

<config_dir> depends on the platform as shown in the following table:

See halp.toml for the default configuration values.

Funding

If you find halp and/or other projects on my GitHub profile useful, consider supporting me on GitHub Sponsors or becoming a patron!

Contributing

See our Contribution Guide and please follow the Code of Conduct in all your interactions with the project.

License

Licensed under either of Apache License Version 2.0 or The MIT License at your option.

🦀 ノ( º _ º ノ) - respect crables!

Copyright

Copyright © 2023-2024, Orhun Parmaksız