redis/hiredis

This Readme reflects the latest changed in the master branch. See v1.0.0 for the Readme and documentation for the latest release (API/ABI history).

HIREDIS

Hiredis is a minimalistic C client library for the Redis database.

It is minimalistic because it just adds minimal support for the protocol, but at the same time it uses a high level printf-alike API in order to make it much higher level than otherwise suggested by its minimal code base and the lack of explicit bindings for every Redis command.

Apart from supporting sending commands and receiving replies, it comes with a reply parser that is decoupled from the I/O layer. It is a stream parser designed for easy reusability, which can for instance be used in higher level language bindings for efficient reply parsing.

Hiredis only supports the binary-safe Redis protocol, so you can use it with any Redis version >= 1.2.0.

The library comes with multiple APIs. There is the synchronous API, the asynchronous API and the reply parsing API.

Upgrading to > 1.2.0 (PRERELEASE)

• After v1.2.0 we modified how we invoke poll(2) to wait for connections to complete, such that we will now retry the call if it is interrupted by a signal until:

  a) The connection succeeds or fails. b) The overall connection timeout is reached.

  In previous versions, an interrupted poll(2) call would cause the connection to fail with c->err set to REDIS_ERR_IO and c->errstr set to poll(2): Interrupted system call.

Upgrading to 1.1.0

Almost all users will simply need to recompile their applications against the newer version of hiredis.

NOTE: Hiredis can now return nan in addition to -inf and inf in a REDIS_REPLY_DOUBLE. Applications that deal with RESP3 doubles should make sure to account for this.

Upgrading to 1.0.2

NOTE: v1.0.1 erroneously bumped SONAME, which is why it is skipped here.

Version 1.0.2 is simply 1.0.0 with a fix for CVE-2021-32765. They are otherwise identical.

Upgrading to 1.0.0

Version 1.0.0 marks the first stable release of Hiredis. It includes some minor breaking changes, mostly to make the exposed API more uniform and self-explanatory. It also bundles the updated sds library, to sync up with upstream and Redis. For code changes see the Changelog.

Note: As described below, a few member names have been changed but most applications should be able to upgrade with minor code changes and recompiling.

IMPORTANT: Breaking changes from 0.14.1 -> 1.0.0

• redisContext has two additional members (free_privdata, and privctx).
• redisOptions.timeout has been renamed to redisOptions.connect_timeout, and we've added redisOptions.command_timeout.
• redisReplyObjectFunctions.createArray now takes size_t instead of int for its length parameter.

IMPORTANT: Breaking changes when upgrading from 0.13.x -> 0.14.x

Bulk and multi-bulk lengths less than -1 or greater than LLONG_MAX are now protocol errors. This is consistent with the RESP specification. On 32-bit platforms, the upper bound is lowered to SIZE_MAX.

Change redisReply.len to size_t, as it denotes the the size of a string

User code should compare this to size_t values as well. If it was used to compare to other values, casting might be necessary or can be removed, if casting was applied before.

Upgrading from <0.9.0

Version 0.9.0 is a major overhaul of hiredis in every aspect. However, upgrading existing code using hiredis should not be a big pain. The key thing to keep in mind when upgrading is that hiredis >= 0.9.0 uses a redisContext* to keep state, in contrast to the stateless 0.0.1 that only has a file descriptor to work with.

Synchronous API

To consume the synchronous API, there are only a few function calls that need to be introduced:

redisContext *redisConnect(const char *ip, int port);
void *redisCommand(redisContext *c, const char *format, ...);
void freeReplyObject(void *reply);

Connecting

The function redisConnect is used to create a so-called redisContext. The context is where Hiredis holds state for a connection. The redisContext struct has an integer err field that is non-zero when the connection is in an error state. The field errstr will contain a string with a description of the error. More information on errors can be found in the Errors section. After trying to connect to Redis using redisConnect you should check the err field to see if establishing the connection was successful:

redisContext *c = redisConnect("127.0.0.1", 6379);
if (c == NULL || c->err) {
    if (c) {
        printf("Error: %s\n", c->errstr);
        // handle error
    } else {
        printf("Can't allocate redis context\n");
    }
}

One can also use redisConnectWithOptions which takes a redisOptions argument that can be configured with endpoint information as well as many different flags to change how the redisContext will be configured.

redisOptions opt = {0};

/* One can set the endpoint with one of our helper macros */
if (tcp) {
    REDIS_OPTIONS_SET_TCP(&opt, "localhost", 6379);
} else {
    REDIS_OPTIONS_SET_UNIX(&opt, "/tmp/redis.sock");
}

/* And privdata can be specified with another helper */
REDIS_OPTIONS_SET_PRIVDATA(&opt, myPrivData, myPrivDataDtor);

/* Finally various options may be set via the `options` member, as described below */
opt->options |= REDIS_OPT_PREFER_IPV4;

If a connection is lost, int redisReconnect(redisContext *c) can be used to restore the connection using the same endpoint and options as the given context.

Configurable redisOptions flags

There are several flags you may set in the redisOptions struct to change default behavior. You can specify the flags via the redisOptions->options member.

Note: A redisContext is not thread-safe.

Other configuration using socket options

The following socket options are applied directly to the underlying socket. The values are not stored in the redisContext, so they are not automatically applied when reconnecting using redisReconnect(). These functions return REDIS_OK on success. On failure, REDIS_ERR is returned and the underlying connection is closed.

To configure these for an asynchronous context (see Asynchronous API below), use ac->c to get the redisContext out of an asyncRedisContext.

int redisEnableKeepAlive(redisContext *c);
int redisEnableKeepAliveWithInterval(redisContext *c, int interval);

Enables TCP keepalive by setting the following socket options (with some variations depending on OS):

• SO_KEEPALIVE;
• TCP_KEEPALIVE or TCP_KEEPIDLE, value configurable using the interval parameter, default 15 seconds;
• TCP_KEEPINTVL set to 1/3 of interval;
• TCP_KEEPCNT set to 3.

int redisSetTcpUserTimeout(redisContext *c, unsigned int timeout);

Set the TCP_USER_TIMEOUT Linux-specific socket option which is as described in the tcp man page:

When the value is greater than 0, it specifies the maximum amount of time in milliseconds that trans mitted data may remain unacknowledged before TCP will forcibly close the corresponding connection and return ETIMEDOUT to the application. If the option value is specified as 0, TCP will use the system default.

Sending commands

There are several ways to issue commands to Redis. The first that will be introduced is redisCommand. This function takes a format similar to printf. In the simplest form, it is used like this:

reply = redisCommand(context, "SET foo bar");

The specifier %s interpolates a string in the command, and uses strlen to determine the length of the string:

reply = redisCommand(context, "SET foo %s", value);

When you need to pass binary safe strings in a command, the %b specifier can be used. Together with a pointer to the string, it requires a size_t length argument of the string:

reply = redisCommand(context, "SET foo %b", value, (size_t) valuelen);

Internally, Hiredis splits the command in different arguments and will convert it to the protocol used to communicate with Redis. One or more spaces separates arguments, so you can use the specifiers anywhere in an argument:

reply = redisCommand(context, "SET key:%s %s", myid, value);

Using replies

The return value of redisCommand holds a reply when the command was successfully executed. When an error occurs, the return value is NULL and the err field in the context will be set (see section on Errors). Once an error is returned the context cannot be reused and you should set up a new connection.

The standard replies that redisCommand are of the type redisReply. The type field in the redisReply should be used to test what kind of reply was received:

RESP2

• REDIS_REPLY_STATUS:

  • The command replied with a status reply. The status string can be accessed using reply->str. The length of this string can be accessed using reply->len.

• REDIS_REPLY_ERROR:

  • The command replied with an error. The error string can be accessed identical to REDIS_REPLY_STATUS.

• REDIS_REPLY_INTEGER:

  • The command replied with an integer. The integer value can be accessed using the reply->integer field of type long long.

• REDIS_REPLY_NIL:

  • The command replied with a nil object. There is no data to access.

• REDIS_REPLY_STRING:

  • A bulk (string) reply. The value of the reply can be accessed using reply->str. The length of this string can be accessed using reply->len.

• REDIS_REPLY_ARRAY:

  • A multi bulk reply. The number of elements in the multi bulk reply is stored in reply->elements. Every element in the multi bulk reply is a redisReply object as well and can be accessed via reply->element[..index..]. Redis may reply with nested arrays but this is fully supported.

RESP3

Hiredis also supports every new RESP3 data type which are as follows. For more information about the protocol see the RESP3 specification.

• REDIS_REPLY_DOUBLE:

  • The command replied with a double-precision floating point number. The value is stored as a string in the str member, and can be converted with strtod or similar.

• REDIS_REPLY_BOOL:

  • A boolean true/false reply. The value is stored in the integer member and will be either 0 or 1.

• REDIS_REPLY_MAP:

  • An array with the added invariant that there will always be an even number of elements. The MAP is functionally equivalent to REDIS_REPLY_ARRAY except for the previously mentioned invariant.

• REDIS_REPLY_SET:

  • An array response where each entry is unique. Like the MAP type, the data is identical to an array response except there are no duplicate values.

• REDIS_REPLY_PUSH:

  • An array that can be generated spontaneously by Redis. This array response will always contain at least two subelements. The first contains the type of PUSH message (e.g. message, or invalidate), and the second being a sub-array with the PUSH payload itself.

• REDIS_REPLY_ATTR:

  • An array structurally identical to a MAP but intended as meta-data about a reply. As of Redis 6.0.6 this reply type is not used in Redis

• REDIS_REPLY_BIGNUM:

  • A string representing an arbitrarily large signed or unsigned integer value. The number will be encoded as a string in the str member of redisReply.

• REDIS_REPLY_VERB:

  • A verbatim string, intended to be presented to the user without modification. The string payload is stored in the str member, and type data is stored in the vtype member (e.g. txt for raw text or md for markdown).

Replies should be freed using the freeReplyObject() function. Note that this function will take care of freeing sub-reply objects contained in arrays and nested arrays, so there is no need for the user to free the sub replies (it is actually harmful and will corrupt the memory).

Important: the current version of hiredis (1.0.0) frees replies when the asynchronous API is used. This means you should not call freeReplyObject when you use this API. The reply is cleaned up by hiredis after the callback returns. We may introduce a flag to make this configurable in future versions of the library.

Cleaning up

To disconnect and free the context the following function can be used:

void redisFree(redisContext *c);

This function immediately closes the socket and then frees the allocations done in creating the context.

Sending commands (continued)

Together with redisCommand, the function redisCommandArgv can be used to issue commands. It has the following prototype:

void *redisCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);

It takes the number of arguments argc, an array of strings argv and the lengths of the arguments argvlen. For convenience, argvlen may be set to NULL and the function will use strlen(3) on every argument to determine its length. Obviously, when any of the arguments need to be binary safe, the entire array of lengths argvlen should be provided.

The return value has the same semantic as redisCommand.

Pipelining

To explain how Hiredis supports pipelining in a blocking connection, there needs to be understanding of the internal execution flow.

When any of the functions in the redisCommand family is called, Hiredis first formats the command according to the Redis protocol. The formatted command is then put in the output buffer of the context. This output buffer is dynamic, so it can hold any number of commands. After the command is put in the output buffer, redisGetReply is called. This function has the following two execution paths:

1. The input buffer is non-empty:
   • Try to parse a single reply from the input buffer and return it
   • If no reply could be parsed, continue at 2
2. The input buffer is empty:
   • Write the entire output buffer to the socket
   • Read from the socket until a single reply could be parsed

The function redisGetReply is exported as part of the Hiredis API and can be used when a reply is expected on the socket. To pipeline commands, the only thing that needs to be done is filling up the output buffer. For this cause, two commands can be used that are identical to the redisCommand family, apart from not returning a reply:

void redisAppendCommand(redisContext *c, const char *format, ...);
void redisAppendCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);

After calling either function one or more times, redisGetReply can be used to receive the subsequent replies. The return value for this function is either REDIS_OK or REDIS_ERR, where the latter means an error occurred while reading a reply. Just as with the other commands, the err field in the context can be used to find out what the cause of this error is.

The following examples shows a simple pipeline (resulting in only a single call to write(2) and a single call to read(2)):

redisReply *reply;
redisAppendCommand(context,"SET foo bar");
redisAppendCommand(context,"GET foo");
redisGetReply(context,(void**)&reply); // reply for SET
freeReplyObject(reply);
redisGetReply(context,(void**)&reply); // reply for GET
freeReplyObject(reply);

This API can also be used to implement a blocking subscriber:

reply = redisCommand(context,"SUBSCRIBE foo");
freeReplyObject(reply);
while(redisGetReply(context,(void *)&reply) == REDIS_OK) {
    // consume message
    freeReplyObject(reply);
}

Errors

When a function call is not successful, depending on the function either NULL or REDIS_ERR is returned. The err field inside the context will be non-zero and set to one of the following constants:

• REDIS_ERR_IO: There was an I/O error while creating the connection, trying to write to the socket or read from the socket. If you included errno.h in your application, you can use the global errno variable to find out what is wrong.

• REDIS_ERR_EOF: The server closed the connection which resulted in an empty read.

• REDIS_ERR_PROTOCOL: There was an error while parsing the protocol.

• REDIS_ERR_OTHER: Any other error. Currently, it is only used when a specified hostname to connect to cannot be resolved.

In every case, the errstr field in the context will be set to hold a string representation of the error.

Asynchronous API

Hiredis comes with an asynchronous API that works easily with any event library. Examples are bundled that show using Hiredis with libev and libevent.

Connecting

The function redisAsyncConnect can be used to establish a non-blocking connection to Redis. It returns a pointer to the newly created redisAsyncContext struct. The err field should be checked after creation to see if there were errors creating the connection. Because the connection that will be created is non-blocking, the kernel is not able to instantly return if the specified host and port is able to accept a connection. In case of error, it is the caller's responsibility to free the context using redisAsyncFree()

Note: A redisAsyncContext is not thread-safe.

An application function creating a connection might look like this:

void appConnect(myAppData *appData)
{
    redisAsyncContext *c = redisAsyncConnect("127.0.0.1", 6379);
    if (c->err) {
        printf("Error: %s\n", c->errstr);
        // handle error
        redisAsyncFree(c);
        c = NULL;
    } else {
        appData->context = c;
        appData->connecting = 1;
        c->data = appData; /* store application pointer for the callbacks */
        redisAsyncSetConnectCallback(c, appOnConnect);
        redisAsyncSetDisconnectCallback(c, appOnDisconnect);
    }
}

The asynchronous context should hold a connect callback function that is called when the connection attempt completes, either successfully or with an error. It can also hold a disconnect callback function that is called when the connection is disconnected (either because of an error or per user request). Both callbacks should have the following prototype:

void(const redisAsyncContext *c, int status);

On a connect, the status argument is set to REDIS_OK if the connection attempt succeeded. In this case, the context is ready to accept commands. If it is called with REDIS_ERR then the connection attempt failed. The err field in the context can be accessed to find out the cause of the error. After a failed connection attempt, the context object is automatically freed by the library after calling the connect callback. This may be a good point to create a new context and retry the connection.

On a disconnect, the status argument is set to REDIS_OK when disconnection was initiated by the user, or REDIS_ERR when the disconnection was caused by an error. When it is REDIS_ERR, the err field in the context can be accessed to find out the cause of the error.

The context object is always freed after the disconnect callback fired. When a reconnect is needed, the disconnect callback is a good point to do so.

Setting the connect or disconnect callbacks can only be done once per context. For subsequent calls the api will return REDIS_ERR. The function to set the callbacks have the following prototype:

/* Alternatively you can use redisAsyncSetConnectCallbackNC which will be passed a non-const
   redisAsyncContext* on invocation (e.g. allowing writes to the privdata member). */
int redisAsyncSetConnectCallback(redisAsyncContext *ac, redisConnectCallback *fn);
int redisAsyncSetDisconnectCallback(redisAsyncContext *ac, redisDisconnectCallback *fn);

ac->data may be used to pass user data to both callbacks. A typical implementation might look something like this:

void appOnConnect(redisAsyncContext *c, int status)
{
    myAppData *appData = (myAppData*)c->data; /* get my application specific context*/
    appData->connecting = 0;
    if (status == REDIS_OK) {
        appData->connected = 1;
    } else {
        appData->connected = 0;
        appData->err = c->err;
        appData->context = NULL; /* avoid stale pointer when callback returns */
    }
    appAttemptReconnect();
}

void appOnDisconnect(redisAsyncContext *c, int status)
{
    myAppData *appData = (myAppData*)c->data; /* get my application specific context*/
    appData->connected = 0;
    appData->err = c->err;
    appData->context = NULL; /* avoid stale pointer when callback returns */
    if (status == REDIS_OK) {
        appNotifyDisconnectCompleted(mydata);
    } else {
        appNotifyUnexpectedDisconnect(mydata);
        appAttemptReconnect();
    }
}

Sending commands and their callbacks

In an asynchronous context, commands are automatically pipelined due to the nature of an event loop. Therefore, unlike the synchronous API, there is only a single way to send commands. Because commands are sent to Redis asynchronously, issuing a command requires a callback function that is called when the reply is received. Reply callbacks should have the following prototype:

void(redisAsyncContext *c, void *reply, void *privdata);

The privdata argument can be used to curry arbitrary data to the callback from the point where the command is initially queued for execution.

The functions that can be used to issue commands in an asynchronous context are:

int redisAsyncCommand(
  redisAsyncContext *ac, redisCallbackFn *fn, void *privdata,
  const char *format, ...);
int redisAsyncCommandArgv(
  redisAsyncContext *ac, redisCallbackFn *fn, void *privdata,
  int argc, const char **argv, const size_t *argvlen);

Both functions work like their blocking counterparts. The return value is REDIS_OK when the command was successfully added to the output buffer and REDIS_ERR otherwise. Example: when the connection is being disconnected per user-request, no new commands may be added to the output buffer and REDIS_ERR is returned on calls to the redisAsyncCommand family.

If the reply for a command with a NULL callback is read, it is immediately freed. When the callback for a command is non-NULL, the memory is freed immediately following the callback: the reply is only valid for the duration of the callback.

All pending callbacks are called with a NULL reply when the context encountered an error.

For every command issued, with the exception of SUBSCRIBE and PSUBSCRIBE, the callback is called exactly once. Even if the context object id disconnected or deleted, every pending callback will be called with a NULL reply.

For SUBSCRIBE and PSUBSCRIBE, the callbacks may be called repeatedly until an unsubscribe message arrives. This will be the last invocation of the callback. In case of error, the callbacks may receive a final NULL reply instead.

Disconnecting

An asynchronous connection can be terminated using:

void redisAsyncDisconnect(redisAsyncContext *ac);

When this function is called, the connection is not immediately terminated. Instead, new commands are no longer accepted and the connection is only terminated when all pending commands have been written to the socket, their respective replies have been read and their respective callbacks have been executed. After this, the disconnection callback is executed with the REDIS_OK status and the context object is freed.

The connection can be forcefully disconnected using

void redisAsyncFree(redisAsyncContext *ac);

In this case, nothing more is written to the socket, all pending callbacks are called with a NULL reply and the disconnection callback is called with REDIS_OK, after which the context object is freed.

Hooking it up to event library X

There are a few hooks that need to be set on the context object after it is created. See the adapters/ directory for bindings to libev and libevent.

Reply parsing API

Hiredis comes with a reply parsing API that makes it easy for writing higher level language bindings.

The reply parsing API consists of the following functions:

redisReader *redisReaderCreate(void);
void redisReaderFree(redisReader *reader);
int redisReaderFeed(redisReader *reader, const char *buf, size_t len);
int redisReaderGetReply(redisReader *reader, void **reply);

The same set of functions are used internally by hiredis when creating a normal Redis context, the above API just exposes it to the user for a direct usage.

Usage

The function redisReaderCreate creates a redisReader structure that holds a buffer with unparsed data and state for the protocol parser.

Incoming data -- most likely from a socket -- can be placed in the internal buffer of the redisReader using redisReaderFeed. This function will make a copy of the buffer pointed to by buf for len bytes. This data is parsed when redisReaderGetReply is called. This function returns an integer status and a reply object (as described above) via void **reply. The returned status can be either REDIS_OK or REDIS_ERR, where the latter means something went wrong (either a protocol error, or an out of memory error).

The parser limits the level of nesting for multi bulk payloads to 7. If the multi bulk nesting level is higher than this, the parser returns an error.

Customizing replies

The function redisReaderGetReply creates redisReply and makes the function argument reply point to the created redisReply variable. For instance, if the response of type REDIS_REPLY_STATUS then the str field of redisReply will hold the status as a vanilla C string. However, the functions that are responsible for creating instances of the redisReply can be customized by setting the fn field on the redisReader struct. This should be done immediately after creating the redisReader.

For example, hiredis-rb uses customized reply object functions to create Ruby objects.

Reader max buffer

Both when using the Reader API directly or when using it indirectly via a normal Redis context, the redisReader structure uses a buffer in order to accumulate data from the server. Usually this buffer is destroyed when it is empty and is larger than 16 KiB in order to avoid wasting memory in unused buffers

However when working with very big payloads destroying the buffer may slow down performances considerably, so it is possible to modify the max size of an idle buffer changing the value of the maxbuf field of the reader structure to the desired value. The special value of 0 means that there is no maximum value for an idle buffer, so the buffer will never get freed.

For instance if you have a normal Redis context you can set the maximum idle buffer to zero (unlimited) just with:

context->reader->maxbuf = 0;

This should be done only in order to maximize performances when working with large payloads. The context should be set back to REDIS_READER_MAX_BUF again as soon as possible in order to prevent allocation of useless memory.

Reader max array elements

By default the hiredis reply parser sets the maximum number of multi-bulk elements to 2^32 - 1 or 4,294,967,295 entries. If you need to process multi-bulk replies with more than this many elements you can set the value higher or to zero, meaning unlimited with:

context->reader->maxelements = 0;

Reader max nesting depth

By default the hiredis reply parser limits nested aggregate replies to a depth of REDIS_READER_MAX_REPLY_DEPTH (currently 1024). If you need to process replies nested more deeply, you can increase the value or set it to zero, meaning unlimited with:

context->reader->maxdepth = 0;

SSL/TLS Support

Building

SSL/TLS support is not built by default and requires an explicit flag:

make USE_SSL=1

This requires OpenSSL development package (e.g. including header files to be available.

When enabled, SSL/TLS support is built into extra libhiredis_ssl.a and libhiredis_ssl.so static/dynamic libraries. This leaves the original libraries unaffected so no additional dependencies are introduced.

Using it

First, you'll need to make sure you include the SSL header file:

#include <hiredis/hiredis.h>
#include <hiredis/hiredis_ssl.h>

You will also need to link against libhiredis_ssl, in addition to libhiredis and add -lssl -lcrypto to satisfy its dependencies.

Hiredis implements SSL/TLS on top of its normal redisContext or redisAsyncContext, so you will need to establish a connection first and then initiate an SSL/TLS handshake.

Hiredis OpenSSL Wrappers

Before Hiredis can negotiate an SSL/TLS connection, it is necessary to initialize OpenSSL and create a context. You can do that in two ways:

1. Work directly with the OpenSSL API to initialize the library's global context and create SSL_CTX * and SSL * contexts. With an SSL * object you can call redisInitiateSSL().
2. Work with a set of Hiredis-provided wrappers around OpenSSL, create a redisSSLContext object to hold configuration and use redisInitiateSSLWithContext() to initiate the SSL/TLS handshake.

/* An Hiredis SSL context. It holds SSL configuration and can be reused across
 * many contexts.
 */
redisSSLContext *ssl_context;

/* An error variable to indicate what went wrong, if the context fails to
 * initialize.
 */
redisSSLContextError ssl_error = REDIS_SSL_CTX_NONE;

/* Initialize global OpenSSL state.
 *
 * You should call this only once when your app initializes, and only if
 * you don't explicitly or implicitly initialize OpenSSL it elsewhere.
 */
redisInitOpenSSL();

/* Create SSL context */
ssl_context = redisCreateSSLContext(
    "cacertbundle.crt",     /* File name of trusted CA/ca bundle file, optional */
    "/path/to/certs",       /* Path of trusted certificates, optional */
    "client_cert.pem",      /* File name of client certificate file, optional */
    "client_key.pem",       /* File name of client private key, optional */
    "redis.mydomain.com",   /* Server name to request (SNI), optional */
    &ssl_error);

if(ssl_context == NULL || ssl_error != REDIS_SSL_CTX_NONE) {
    /* Handle error and abort... */
    /* e.g.
    printf("SSL error: %s\n",
        (ssl_error != REDIS_SSL_CTX_NONE) ?
            redisSSLContextGetError(ssl_error) : "Unknown error");
    // Abort
    */
}

/* Create Redis context and establish connection */
c = redisConnect("localhost", 6443);
if (c == NULL || c->err) {
    /* Handle error and abort... */
}

/* Negotiate SSL/TLS */
if (redisInitiateSSLWithContext(c, ssl_context) != REDIS_OK) {
    /* Handle error, in c->err / c->errstr */
}

RESP3 PUSH replies

Redis 6.0 introduced PUSH replies with the reply-type >. These messages are generated spontaneously and can arrive at any time, so must be handled using callbacks.

Default behavior

Hiredis installs handlers on redisContext and redisAsyncContext by default, which will intercept and free any PUSH replies detected. This means existing code will work as-is after upgrading to Redis 6 and switching to RESP3.

Custom PUSH handler prototypes

The callback prototypes differ between redisContext and redisAsyncContext.

redisContext

void my_push_handler(void *privdata, void *reply) {
    /* Handle the reply */

    /* Note: We need to free the reply in our custom handler for
             blocking contexts.  This lets us keep the reply if
             we want. */
    freeReplyObject(reply);
}

redisAsyncContext

void my_async_push_handler(redisAsyncContext *ac, void *reply) {
    /* Handle the reply */

    /* Note:  Because async hiredis always frees replies, you should
              not call freeReplyObject in an async push callback. */
}

Installing a custom handler

There are two ways to set your own PUSH handlers.

1. Set push_cb or async_push_cb in the redisOptions struct and connect with redisConnectWithOptions or redisAsyncConnectWithOptions.

   redisOptions = {0};
   REDIS_OPTIONS_SET_TCP(&options, "127.0.0.1", 6379);
   options->push_cb = my_push_handler;
   redisContext *context = redisConnectWithOptions(&options);
   

2. Call redisSetPushCallback or redisAsyncSetPushCallback on a connected context.

   redisContext *context = redisConnect("127.0.0.1", 6379);
   redisSetPushCallback(context, my_push_handler);
   

   Note redisSetPushCallback and redisAsyncSetPushCallback both return any currently configured handler, making it easy to override and then return to the old value.

Specifying no handler

If you have a unique use-case where you don't want hiredis to automatically intercept and free PUSH replies, you will want to configure no handler at all. This can be done in two ways.

1. Set the REDIS_OPT_NO_PUSH_AUTOFREE flag in redisOptions and leave the callback function pointer NULL.

   redisOptions = {0};
   REDIS_OPTIONS_SET_TCP(&options, "127.0.0.1", 6379);
   options->options |= REDIS_OPT_NO_PUSH_AUTOFREE;
   redisContext *context = redisConnectWithOptions(&options);
   

2. Call redisSetPushCallback with NULL once connected.

   redisContext *context = redisConnect("127.0.0.1", 6379);
   redisSetPushCallback(context, NULL);
   

   Note: With no handler configured, calls to redisCommand may generate more than one reply, so this strategy is only applicable when there's some kind of blocking redisGetReply() loop (e.g. MONITOR or SUBSCRIBE workloads).

Allocator injection

Hiredis uses a pass-thru structure of function pointers defined in alloc.h that contain the currently configured allocation and deallocation functions. By default they just point to libc (malloc, calloc, realloc, etc).

Overriding

One can override the allocators like so:

hiredisAllocFuncs myfuncs = {
    .mallocFn = my_malloc,
    .callocFn = my_calloc,
    .reallocFn = my_realloc,
    .strdupFn = my_strdup,
    .freeFn = my_free,
};

// Override allocators (function returns current allocators if needed)
hiredisAllocFuncs orig = hiredisSetAllocators(&myfuncs);

To reset the allocators to their default libc function simply call:

hiredisResetAllocators();

AUTHORS

Salvatore Sanfilippo (antirez at gmail),
Pieter Noordhuis (pcnoordhuis at gmail)
Michael Grunder (michael dot grunder at gmail)

Hiredis is released under the BSD license.