As an open-source project, werman/noise-suppression-for-voice has picked up 7.0k stars on GitHub (C++). Noise suppression plugin based on Xiph's RNNoise
Snapshot summary built from the project's own GitHub metadata — there's no written TopGit review yet. The page will update automatically when a full review is published.
WHY NO REVIEW YET
TopGit writes full reviews for the most-starred, most-requested repositories. This page is a snapshot until then — see the READ ME tab for the original README in full.
A real-time noise suppression plugin for voice based on Xiph's RNNoise. More info about the base library.
The plugin is meant to suppress a wide range of noise origins (from original paper): computer fans, office, crowd, airplane, car, train, construction.
From my tests mild background noise is always suppressed, loud sounds, like clicking of mechanical keyboard, are suppressed while there is no voice however they are only reduced in volume when voice is present.
Please note that this plugin could not improve the voice quality with bad microphone, it even could make things worse by misclassifying the voice as a noise which would reduce already not-so-good voice quality.
The plugin works with one or more channels, 16 bit, 48000 Hz audio input.
:exclamation: :exclamation: :exclamation: Do NOT use any other sample rates, use ONLY 48000 Hz, make sure your audio source is 48000 Hz and force it to be 48000 Hz if it is not.
There is a minimalistic GUI with all parameters and diagnostic stats:
Releases
Latest releases
How-to
Plugin Settings
VAD Threshold (%) - if probability of sound being a voice is lower than this threshold - it will be silenced.
In most cases the threshold between 85% - 95% would be fine.
Without the VAD some loud noises may still be a bit audible when there is no voice.
VAD Grace Period (ms) - for how long after the last voice detection the output won't be silenced. This helps when ends of words/sentences are being cut off.
Retroactive VAD Grace Period (ms) - similar to VAD Grace Period (ms) but for starts of words/sentences. :warning: This introduces latency!
Windows + Equalizer APO (VST2)
To check or change mic settings go to "Recording devices" -> "Recording" -> "Properties" of the target mic -> "Advanced".
To enable the plugin in Equalizer APO select "Plugins" -> "VST Plugin" and specify the plugin dll.
See detailed guide provided by @bssankaran.
v1.0: Now there is a GUI, so it became easy to change parameters.
Linux
PipeWire
Since version 0.3.45 PipeWire uses Split-File Configuration, making it extremely easy to set up plugins and tweak configuration.
For older PipeWire version you'd have to copy /usr/share/pipewire/pipewire.conf into ~/.config/pipewire/pipewire.conf and then append the configuration below to already existing context.modules.
Change /path/to/librnnoise_ladspa.so to actual library path
If you are absolutely sure that you need stereo output - change noise_suppressor_mono -> noise_suppressor_stereo. Even if your mic says that it is stereo - you probably don't need stereo output. It also would consume 2x resources.
Configure plugin parameters: VAD Threshold (%), ...
The order of settings in control=50,200,0,0,0 is: VAD Threshold (%), VAD Grace Period (ms), Retroactive VAD Grace Period (ms), Placeholder1, Placeholder2.
If you are absolutely sure that you want a stereo input use these options instead:
label=noise_suppressor_stereo
channels=2
If you have problems with audio crackling or high / periodically increasing latency, adding latency_msec=1 to the loopback might help:
:warning: Chrome and other Chromium based browsers will ignore monitor devices and you will not be able to select the "Monitor of Null Output".
To work around this, either use pavucontrol to assign the input to Chrome, or remap this device in PulseAudio to create a regular source:
You may still need to set correct input for application, this can be done in audio mixer panel (if you have one) in 'Recording' tab where you should set 'Monitor of Null Output' as source.
Further reading:
Useful detailed info about PulseAudio logic toadjaune/pulseaudio-config.
The thread which helped me with how to post-process mic output and make it available to applications.
MacOS
TODO, contributions are welcomed!
Status
The plugin is tested with:
Equalizer APO v1.2 x64 (open source system-wide equalizer for Windows)
PipeWire on Arch Linux
Carla (on Linux)
Audacity (on Linux)
I'm not associated with the original RNNoise work and do NOT have any understanding of recurrent neural networks it is based upon.
Contributing
External dependencies are vendored via git-subrepo. So that there is no need to use submodules, and patching subrepos is easy (at the moment we have several patches for JUCE).
Improvements are welcomed! Though if you want to contribute anything sizeable - open an issue first.
Is werman/noise-suppression-for-voice open source?
Yes — werman/noise-suppression-for-voice ships under the GPL-3.0 license, which makes its source code freely readable (and, depending on license terms, forkable and reusable). Source: github.com/werman/noise-suppression-for-voice.
What is werman/noise-suppression-for-voice?
werman/noise-suppression-for-voice (werman/noise-suppression-for-voice) is a C++ project on GitHub. From the project's own README: Noise suppression plugin based on Xiph's RNNoise
Where do I read more about werman/noise-suppression-for-voice?
This TopGit page is a snapshot — the READ ME tab shows the project's own README content (links stripped, images preserved). The GitHub repository at github.com/werman/noise-suppression-for-voice is the definitive source.
Read full README in the tab above.
Is noise-suppression-for-voice worth your time?
ChatGPT, Claude and Perplexity can all read this page. Ask one of them what it makes of noise-suppression-for-voice.